Build of zimg with vanilla toolchain

The build took 00h 01m 30s and was SUCCESSFUL.

The program in this build is written in the following languages, according to sloccount:

SLOCLanguage
17,531 cpp
4,182 sh
2,478 makefile
1,611 ansic
25,802 total

The process tree of the build process is here.

Log

To avoid scrolling, you may jump to the last line of the invocation of makepkg that was used to build this package.

Removed vanilla repositories from pacman.conf and added:
# [tuscan]
# Server = file:///var/cache/pacman/pkg/

CMD: pacman -Syy --noconfirm
# :: Synchronizing package databases...
# downloading tuscan.db...

CMD: sudo -u tuscan red makepkg --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
# ==> Making package: zimg 2.1-1 (Wed Aug 24 12:58:51 UTC 2016)
# ==> Checking runtime dependencies...
# ==> Checking buildtime dependencies...
# ==> WARNING: Using existing $srcdir/ tree
# ==> Starting build()...
# autoreconf: Entering directory `.'
# autoreconf: configure.ac: not using Gettext
# autoreconf: running: aclocal --force -I m4
# autoreconf: configure.ac: tracing
# autoreconf: configure.ac: subdirectory test/extra/googletest/googletest not present
# autoreconf: running: libtoolize --copy --force
# libtoolize: putting auxiliary files in '.'.
# libtoolize: copying file './ltmain.sh'
# libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
# libtoolize: copying file 'm4/libtool.m4'
# libtoolize: copying file 'm4/ltoptions.m4'
# libtoolize: copying file 'm4/ltsugar.m4'
# libtoolize: copying file 'm4/ltversion.m4'
# libtoolize: copying file 'm4/lt~obsolete.m4'
# autoreconf: running: /usr/bin/autoconf --force
# autoreconf: configure.ac: not using Autoheader
# autoreconf: running: automake --add-missing --copy --force-missing
# Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ \t=:+{}]+)}/ at /usr/sbin/automake line 3936.
# configure.ac:10: installing './compile'
# configure.ac:10: installing './config.guess'
# configure.ac:10: installing './config.sub'
# configure.ac:7: installing './install-sh'
# configure.ac:7: installing './missing'
# Makefile.am: installing './depcomp'
# parallel-tests: installing './test-driver'
# autoreconf: Leaving directory `.'
# checking for a BSD-compatible install... /usr/bin/install -c
# checking whether build environment is sane... yes
# checking for x86_64-unknown-linux-strip... no
# checking for strip... strip
# checking for a thread-safe mkdir -p... /usr/sbin/mkdir -p
# checking for gawk... gawk
# checking whether make sets $(MAKE)... yes
# checking whether make supports nested variables... yes
# checking whether make supports nested variables... (cached) yes
# checking build system type... x86_64-unknown-linux-gnu
# checking host system type... x86_64-unknown-linux-gnu
# checking how to print strings... printf
# checking for style of include used by make... GNU
# checking for x86_64-unknown-linux-gcc... no
# checking for gcc... gcc
# checking whether the C compiler works... yes
# checking for C compiler default output file name... a.out
# checking for suffix of executables...
# checking whether we are cross compiling... no
# checking for suffix of object files... o
# checking whether we are using the GNU C compiler... yes
# checking whether gcc accepts -g... yes
# checking for gcc option to accept ISO C89... none needed
# checking whether gcc understands -c and -o together... yes
# checking dependency style of gcc... gcc3
# checking for a sed that does not truncate output... /usr/sbin/sed
# checking for grep that handles long lines and -e... /usr/sbin/grep
# checking for egrep... /usr/sbin/grep -E
# checking for fgrep... /usr/sbin/grep -F
# checking for ld used by gcc... /usr/sbin/ld
# checking if the linker (/usr/sbin/ld) is GNU ld... yes
# checking for BSD- or MS-compatible name lister (nm)... /usr/sbin/nm -B
# checking the name lister (/usr/sbin/nm -B) interface... BSD nm
# checking whether ln -s works... yes
# checking the maximum length of command line arguments... 1572864
# checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
# checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
# checking for /usr/sbin/ld option to reload object files... -r
# checking for x86_64-unknown-linux-objdump... no
# checking for objdump... objdump
# checking how to recognize dependent libraries... pass_all
# checking for x86_64-unknown-linux-dlltool... no
# checking for dlltool... no
# checking how to associate runtime and link libraries... printf %s\n
# checking for x86_64-unknown-linux-ar... no
# checking for ar... ar
# checking for archiver @FILE support... @
# checking for x86_64-unknown-linux-strip... strip
# checking for x86_64-unknown-linux-ranlib... no
# checking for ranlib... ranlib
# checking command to parse /usr/sbin/nm -B output from gcc object... ok
# checking for sysroot... no
# checking for a working dd... /usr/sbin/dd
# checking how to truncate binary pipes... /usr/sbin/dd bs=4096 count=1
# checking for x86_64-unknown-linux-mt... no
# checking for mt... no
# checking if : is a manifest tool... no
# checking how to run the C preprocessor... gcc -E
# checking for ANSI C header files... yes
# checking for sys/types.h... yes
# checking for sys/stat.h... yes
# checking for stdlib.h... yes
# checking for string.h... yes
# checking for memory.h... yes
# checking for strings.h... yes
# checking for inttypes.h... yes
# checking for stdint.h... yes
# checking for unistd.h... yes
# checking for dlfcn.h... yes
# checking for objdir... .libs
# checking if gcc supports -fno-rtti -fno-exceptions... no
# checking for gcc option to produce PIC... -fPIC -DPIC
# checking if gcc PIC flag -fPIC -DPIC works... yes
# checking if gcc static flag -static works... yes
# checking if gcc supports -c -o file.o... yes
# checking if gcc supports -c -o file.o... (cached) yes
# checking whether the gcc linker (/usr/sbin/ld -m elf_x86_64) supports shared libraries... yes
# checking whether -lc should be explicitly linked in... no
# checking dynamic linker characteristics... GNU/Linux ld.so
# checking how to hardcode library paths into programs... immediate
# checking whether stripping libraries is possible... yes
# checking if libtool supports shared libraries... yes
# checking whether to build shared libraries... yes
# checking whether to build static libraries... no
# checking for x86_64-unknown-linux-g++... no
# checking for x86_64-unknown-linux-c++... no
# checking for x86_64-unknown-linux-gpp... no
# checking for x86_64-unknown-linux-aCC... no
# checking for x86_64-unknown-linux-CC... no
# checking for x86_64-unknown-linux-cxx... no
# checking for x86_64-unknown-linux-cc++... no
# checking for x86_64-unknown-linux-cl.exe... no
# checking for x86_64-unknown-linux-FCC... no
# checking for x86_64-unknown-linux-KCC... no
# checking for x86_64-unknown-linux-RCC... no
# checking for x86_64-unknown-linux-xlC_r... no
# checking for x86_64-unknown-linux-xlC... no
# checking for g++... g++
# checking whether we are using the GNU C++ compiler... yes
# checking whether g++ accepts -g... yes
# checking dependency style of g++... gcc3
# checking how to run the C++ preprocessor... g++ -E
# checking for ld used by g++... /usr/sbin/ld -m elf_x86_64
# checking if the linker (/usr/sbin/ld -m elf_x86_64) is GNU ld... yes
# checking whether the g++ linker (/usr/sbin/ld -m elf_x86_64) supports shared libraries... yes
# checking for g++ option to produce PIC... -fPIC -DPIC
# checking if g++ PIC flag -fPIC -DPIC works... yes
# checking if g++ static flag -static works... yes
# checking if g++ supports -c -o file.o... yes
# checking if g++ supports -c -o file.o... (cached) yes
# checking whether the g++ linker (/usr/sbin/ld -m elf_x86_64) supports shared libraries... yes
# checking dynamic linker characteristics... (cached) GNU/Linux ld.so
# checking how to hardcode library paths into programs... immediate
# checking if compiler needs -Werror to reject unknown flags... no
# checking for the pthreads library -lpthreads... no
# checking whether pthreads work without any flags... no
# checking whether pthreads work with -Kthread... no
# checking whether pthreads work with -kthread... no
# checking for the pthreads library -llthread... no
# checking whether pthreads work with -pthread... yes
# checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
# checking if more special flags are required for pthreads... no
# checking for PTHREAD_PRIO_INHERIT... yes
# checking that generated files are newer than configure... done
# configure: creating ./config.status
# config.status: creating Makefile
# config.status: creating zimg.pc
# config.status: executing depfiles commands
# config.status: executing libtool commands
# make[1]: Entering directory '/tmp/zimg/src/zimg-release-2.1'
# CXX src/zimg/colorspace/libzimg_la-operation_impl_x86.lo
# CXX src/zimg/common/libzimg_la-x86util.lo
# CXX src/zimg/depth/libzimg_la-depth_convert_x86.lo
# CXX src/zimg/depth/libzimg_la-dither_x86.lo
# CXX src/zimg/resize/libzimg_la-resize_impl_x86.lo
# CXX src/zimg/colorspace/libsse_la-operation_impl_sse.lo
# CXX src/zimg/resize/libsse_la-resize_impl_sse.lo
# CXX src/zimg/depth/libsse2_la-depth_convert_sse2.lo
# CXX src/zimg/depth/libsse2_la-dither_sse2.lo
# CXX src/zimg/depth/libsse2_la-f16c_sse2.lo
# CXX src/zimg/resize/libsse2_la-resize_impl_sse2.lo
# CXX src/zimg/colorspace/libavx_la-operation_impl_avx.lo
# CXX src/zimg/resize/libavx_la-resize_impl_avx.lo
# CXX src/zimg/depth/libf16c_la-f16c_ivb.lo
# CXX src/zimg/depth/libavx2_la-depth_convert_avx2.lo
# CXX src/zimg/depth/libavx2_la-dither_avx2.lo
# CXX src/zimg/resize/libavx2_la-resize_impl_avx2.lo
# CXX src/zimg/api/libzimg_la-zimg.lo
# CXX src/zimg/colorspace/libzimg_la-colorspace.lo
# CXX src/zimg/colorspace/libzimg_la-colorspace_param.lo
# CXX src/zimg/colorspace/libzimg_la-graph.lo
# CXX src/zimg/colorspace/libzimg_la-matrix3.lo
# CXX src/zimg/colorspace/libzimg_la-operation.lo
# CXX src/zimg/colorspace/libzimg_la-operation_impl.lo
# CXX src/zimg/common/libzimg_la-cpuinfo.lo
# CXX src/zimg/common/libzimg_la-libm_wrapper.lo
# CXX src/zimg/common/libzimg_la-matrix.lo
# CXX src/zimg/depth/libzimg_la-depth_convert.lo
# CXX src/zimg/depth/libzimg_la-depth.lo
# CXX src/zimg/depth/libzimg_la-dither.lo
# CXX src/zimg/graph/libzimg_la-basic_filter.lo
# CXX src/zimg/graph/libzimg_la-filtergraph.lo
# CXX src/zimg/graph/libzimg_la-graphbuilder.lo
# CXX src/zimg/resize/libzimg_la-filter.lo
# CXX src/zimg/resize/libzimg_la-resize.lo
# CXX src/zimg/resize/libzimg_la-resize_impl.lo
# CXX src/zimg/unresize/libzimg_la-bilinear.lo
# CXX src/zimg/unresize/libzimg_la-unresize.lo
# CXX src/zimg/unresize/libzimg_la-unresize_impl.lo
# CXXLD libsse.la
# ar: `u' modifier ignored since `D' is the default (see `U')
# CXXLD libsse2.la
# CXXLD libavx.la
# ar: `u' modifier ignored since `D' is the default (see `U')
# CXXLD libf16c.la
# ar: `u' modifier ignored since `D' is the default (see `U')
# CXXLD libavx2.la
# ar: `u' modifier ignored since `D' is the default (see `U')
# ar: `u' modifier ignored since `D' is the default (see `U')
# CXXLD libzimg.la
# make[1]: Leaving directory '/tmp/zimg/src/zimg-release-2.1'
# ==> Entering fakeroot environment...
# ==> Starting package()...
# make[1]: Entering directory '/tmp/zimg/src/zimg-release-2.1'
# make[2]: Entering directory '/tmp/zimg/src/zimg-release-2.1'
# /usr/sbin/mkdir -p '/tmp/zimg/pkg/zimg/usr/lib'
# /usr/sbin/mkdir -p '/tmp/zimg/pkg/zimg/usr/include'
# /bin/sh ./libtool --mode=install /usr/bin/install -c libzimg.la '/tmp/zimg/pkg/zimg/usr/lib'
# /usr/bin/install -c -m 644 src/zimg/api/zimg.h src/zimg/api/zimg++.hpp '/tmp/zimg/pkg/zimg/usr/include'
# /usr/sbin/mkdir -p '/tmp/zimg/pkg/zimg/usr/lib/pkgconfig'
# /usr/bin/install -c -m 644 zimg.pc '/tmp/zimg/pkg/zimg/usr/lib/pkgconfig'
# libtool: install: /usr/bin/install -c .libs/libzimg.so.2.0.0 /tmp/zimg/pkg/zimg/usr/lib/libzimg.so.2.0.0
# libtool: install: (cd /tmp/zimg/pkg/zimg/usr/lib && { ln -s -f libzimg.so.2.0.0 libzimg.so.2 || { rm -f libzimg.so.2 && ln -s libzimg.so.2.0.0 libzimg.so.2; }; })
# libtool: install: (cd /tmp/zimg/pkg/zimg/usr/lib && { ln -s -f libzimg.so.2.0.0 libzimg.so || { rm -f libzimg.so && ln -s libzimg.so.2.0.0 libzimg.so; }; })
# libtool: install: /usr/bin/install -c .libs/libzimg.lai /tmp/zimg/pkg/zimg/usr/lib/libzimg.la
# libtool: warning: remember to run 'libtool --finish /usr/lib'
# make[2]: Leaving directory '/tmp/zimg/src/zimg-release-2.1'
# make[1]: Leaving directory '/tmp/zimg/src/zimg-release-2.1'
# ==> Tidying install...
# -> Removing doc files...
# -> Removing empty directories...
# -> Purging unwanted files...
# ==> Checking for packaging issue...
# ==> Creating package "zimg"...
# -> Generating .PKGINFO file...
# -> Generating .BUILDINFO file...
# error: invalid option '--noprogressbar'
# -> Generating .MTREE file...
# -> Compressing package...
# ==> Leaving fakeroot environment.
# ==> Finished making: zimg 2.1-1 (Wed Aug 24 12:59:26 UTC 2016)

CMD: pacman --query --file zimg-2.1-1-x86_64.pkg.tar.xz
# zimg 2.1-1

Creating hybrid package for 'zimg'

Trying to find vanilla package 'zimg'...

CMD: pacman --query --file /mirror/zimg-2.1-1.pkg.tar.xz
# zimg 2.1-1

Package file has the following structure:
# /.PKGINFO
# /.BUILDINFO
# /.MTREE
# /usr/include/zimg++.hpp
# /usr/include/zimg.h
# /usr/lib/libzimg.so
# /usr/lib/libzimg.so.2.0.0
# /usr/lib/libzimg.so.2
# /usr/lib/pkgconfig/zimg.pc
# /usr/share/licenses/zimg/COPYING
# /sysroot/usr/lib/libzimg.so.2.0.0
# /sysroot/usr/lib/libzimg.so.2
# /sysroot/usr/lib/libzimg.so
# /sysroot/usr/lib/libzimg.la
# /sysroot/usr/lib/pkgconfig/zimg.pc
# /sysroot/usr/include/zimg.h
# /sysroot/usr/include/zimg++.hpp

Generating .MTREE

CMD: bsdtar -czf .MTREE --format=mtree --options=!all,use-set,type,uid,mode,time,size,md5,sha256,link .PKGINFO .BUILDINFO usr sysroot

Tar-ing up files

CMD: bsdtar -cf - .PKGINFO .BUILDINFO usr sysroot .MTREE

CMD: xz -c -z

Successfully ran bsdtar -cf - .PKGINFO .BUILDINFO usr sysroot .MTREE | xz -c -z

CMD: bsdtar -tqf zimg.pkg.tar.xz .PKGINFO
# .PKGINFO

Created package at path /var/cache/pacman/pkg/zimg.pkg.tar.xz

Attempting to access local repository, attempt 1

CMD: repo-add /var/cache/pacman/pkg/tuscan.db.tar /var/cache/pacman/pkg/zimg.pkg.tar.xz
# ==> Extracting database to a temporary location...
# ==> Extracting database to a temporary location...
# ==> Adding package '/var/cache/pacman/pkg/zimg.pkg.tar.xz'
# -> Computing checksums...
# -> Creating 'desc' db entry...
# -> Creating 'files' db entry...
# ==> Creating updated database file '/var/cache/pacman/pkg/tuscan.db.tar'

Printing config logfiles

CMD: config logfiles '/tmp/zimg/src/zimg-release-2.1/config.log'
# This file contains any messages produced by compilers while
# running configure, to aid debugging if configure makes a mistake.
#
# It was created by zimg configure 2.1.0, which was
# generated by GNU Autoconf 2.69. Invocation command line was
#
# $ ./configure --host=x86_64-unknown-linux --prefix=/usr --enable-x86simd --disable-static
#
# ## --------- ##
# ## Platform. ##
# ## --------- ##
#
# hostname = 284929bad798
# uname -m = x86_64
# uname -r = 4.7.1-1-ARCH
# uname -s = Linux
# uname -v = #1 SMP PREEMPT Wed Aug 17 08:13:35 CEST 2016
#
# /usr/bin/uname -p = unknown
# /bin/uname -X = unknown
#
# /bin/arch = unknown
# /usr/bin/arch -k = unknown
# /usr/convex/getsysinfo = unknown
# /usr/bin/hostinfo = unknown
# /bin/machine = unknown
# /usr/bin/oslevel = unknown
# /bin/universe = unknown
#
# PATH: /usr/local/sbin
# PATH: /usr/local/bin
# PATH: /usr/sbin
# PATH: /usr/bin
# PATH: /sbin
# PATH: /bin
#
#
# ## ----------- ##
# ## Core tests. ##
# ## ----------- ##
#
# configure:2337: checking for a BSD-compatible install
# configure:2405: result: /usr/bin/install -c
# configure:2416: checking whether build environment is sane
# configure:2471: result: yes
# configure:2530: checking for x86_64-unknown-linux-strip
# configure:2560: result: no
# configure:2570: checking for strip
# configure:2586: found /usr/sbin/strip
# configure:2597: result: strip
# configure:2622: checking for a thread-safe mkdir -p
# configure:2661: result: /usr/sbin/mkdir -p
# configure:2668: checking for gawk
# configure:2684: found /usr/sbin/gawk
# configure:2695: result: gawk
# configure:2706: checking whether make sets $(MAKE)
# configure:2728: result: yes
# configure:2757: checking whether make supports nested variables
# configure:2774: result: yes
# configure:2902: checking whether make supports nested variables
# configure:2919: result: yes
# configure:2960: checking build system type
# configure:2974: result: x86_64-unknown-linux-gnu
# configure:2994: checking host system type
# configure:3007: result: x86_64-unknown-linux-gnu
# configure:3048: checking how to print strings
# configure:3075: result: printf
# configure:3108: checking for style of include used by make
# configure:3136: result: GNU
# configure:3167: checking for x86_64-unknown-linux-gcc
# configure:3197: result: no
# configure:3207: checking for gcc
# configure:3223: found /usr/sbin/gcc
# configure:3234: result: gcc
# configure:3463: checking for C compiler version
# configure:3472: gcc --version >&5
# gcc (GCC) 6.1.1 20160602
# Copyright (C) 2016 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# configure:3483: $? = 0
# configure:3472: gcc -v >&5
# Using built-in specs.
# COLLECT_GCC=gcc
# COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/6.1.1/lto-wrapper
# Target: x86_64-pc-linux-gnu
# Configured with: /build/gcc/src/gcc/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --disable-multilib --disable-werror --enable-checking=release
# Thread model: posix
# gcc version 6.1.1 20160602 (GCC)
# configure:3483: $? = 0
# configure:3472: gcc -V >&5
# gcc: error: unrecognized command line option '-V'
# gcc: fatal error: no input files
# compilation terminated.
# configure:3483: $? = 1
# configure:3472: gcc -qversion >&5
# gcc: error: unrecognized command line option '-qversion'; did you mean '--version'?
# gcc: fatal error: no input files
# compilation terminated.
# configure:3483: $? = 1
# configure:3503: checking whether the C compiler works
# configure:3525: gcc conftest.c >&5
# configure:3529: $? = 0
# configure:3577: result: yes
# configure:3580: checking for C compiler default output file name
# configure:3582: result: a.out
# configure:3588: checking for suffix of executables
# configure:3595: gcc -o conftest conftest.c >&5
# configure:3599: $? = 0
# configure:3621: result:
# configure:3643: checking whether we are cross compiling
# configure:3651: gcc -o conftest conftest.c >&5
# configure:3655: $? = 0
# configure:3662: ./conftest
# configure:3666: $? = 0
# configure:3681: result: no
# configure:3686: checking for suffix of object files
# configure:3708: gcc -c conftest.c >&5
# configure:3712: $? = 0
# configure:3733: result: o
# configure:3737: checking whether we are using the GNU C compiler
# configure:3756: gcc -c conftest.c >&5
# configure:3756: $? = 0
# configure:3765: result: yes
# configure:3774: checking whether gcc accepts -g
# configure:3794: gcc -c -g conftest.c >&5
# configure:3794: $? = 0
# configure:3835: result: yes
# configure:3852: checking for gcc option to accept ISO C89
# configure:3915: gcc -c conftest.c >&5
# configure:3915: $? = 0
# configure:3928: result: none needed
# configure:3953: checking whether gcc understands -c and -o together
# configure:3975: gcc -c conftest.c -o conftest2.o
# configure:3978: $? = 0
# configure:3975: gcc -c conftest.c -o conftest2.o
# configure:3978: $? = 0
# configure:3990: result: yes
# configure:4009: checking dependency style of gcc
# configure:4120: result: gcc3
# configure:4135: checking for a sed that does not truncate output
# configure:4199: result: /usr/sbin/sed
# configure:4217: checking for grep that handles long lines and -e
# configure:4275: result: /usr/sbin/grep
# configure:4280: checking for egrep
# configure:4342: result: /usr/sbin/grep -E
# configure:4347: checking for fgrep
# configure:4409: result: /usr/sbin/grep -F
# configure:4444: checking for ld used by gcc
# configure:4511: result: /usr/sbin/ld
# configure:4518: checking if the linker (/usr/sbin/ld) is GNU ld
# configure:4533: result: yes
# configure:4545: checking for BSD- or MS-compatible name lister (nm)
# configure:4599: result: /usr/sbin/nm -B
# configure:4729: checking the name lister (/usr/sbin/nm -B) interface
# configure:4736: gcc -c conftest.c >&5
# configure:4739: /usr/sbin/nm -B "conftest.o"
# configure:4742: output
# 0000000000000000 B some_variable
# configure:4749: result: BSD nm
# configure:4752: checking whether ln -s works
# configure:4756: result: yes
# configure:4764: checking the maximum length of command line arguments
# configure:4895: result: 1572864
# configure:4943: checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format
# configure:4983: result: func_convert_file_noop
# configure:4990: checking how to convert x86_64-unknown-linux-gnu file names to toolchain format
# configure:5010: result: func_convert_file_noop
# configure:5017: checking for /usr/sbin/ld option to reload object files
# configure:5024: result: -r
# configure:5058: checking for x86_64-unknown-linux-objdump
# configure:5088: result: no
# configure:5098: checking for objdump
# configure:5114: found /usr/sbin/objdump
# configure:5125: result: objdump
# configure:5154: checking how to recognize dependent libraries
# configure:5354: result: pass_all
# configure:5399: checking for x86_64-unknown-linux-dlltool
# configure:5429: result: no
# configure:5439: checking for dlltool
# configure:5469: result: no
# configure:5496: checking how to associate runtime and link libraries
# configure:5523: result: printf %s\n
# configure:5540: checking for x86_64-unknown-linux-ar
# configure:5570: result: no
# configure:5584: checking for ar
# configure:5600: found /usr/sbin/ar
# configure:5611: result: ar
# configure:5648: checking for archiver @FILE support
# configure:5665: gcc -c conftest.c >&5
# configure:5665: $? = 0
# configure:5668: ar cru libconftest.a @conftest.lst >&5
# ar: `u' modifier ignored since `D' is the default (see `U')
# configure:5671: $? = 0
# configure:5676: ar cru libconftest.a @conftest.lst >&5
# ar: `u' modifier ignored since `D' is the default (see `U')
# ar: conftest.o: No such file or directory
# configure:5679: $? = 1
# configure:5691: result: @
# configure:5709: checking for x86_64-unknown-linux-strip
# configure:5736: result: strip
# configure:5808: checking for x86_64-unknown-linux-ranlib
# configure:5838: result: no
# configure:5848: checking for ranlib
# configure:5864: found /usr/sbin/ranlib
# configure:5875: result: ranlib
# configure:5977: checking command to parse /usr/sbin/nm -B output from gcc object
# configure:6130: gcc -c conftest.c >&5
# configure:6133: $? = 0
# configure:6137: /usr/sbin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm
# configure:6140: $? = 0
# configure:6206: gcc -o conftest conftest.c conftstm.o >&5
# configure:6209: $? = 0
# configure:6247: result: ok
# configure:6294: checking for sysroot
# configure:6324: result: no
# configure:6331: checking for a working dd
# configure:6369: result: /usr/sbin/dd
# configure:6373: checking how to truncate binary pipes
# configure:6388: result: /usr/sbin/dd bs=4096 count=1
# configure:6524: gcc -c conftest.c >&5
# configure:6527: $? = 0
# configure:6677: checking for x86_64-unknown-linux-mt
# configure:6707: result: no
# configure:6717: checking for mt
# configure:6747: result: no
# configure:6767: checking if : is a manifest tool
# configure:6773: : '-?'
# configure:6781: result: no
# configure:7458: checking how to run the C preprocessor
# configure:7489: gcc -E conftest.c
# configure:7489: $? = 0
# configure:7503: gcc -E conftest.c
# conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory
# #include
# ^
# compilation terminated.
# configure:7503: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | /* end confdefs.h. */
# | #include
# configure:7528: result: gcc -E
# configure:7548: gcc -E conftest.c
# configure:7548: $? = 0
# configure:7562: gcc -E conftest.c
# conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory
# #include
# ^
# compilation terminated.
# configure:7562: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | /* end confdefs.h. */
# | #include
# configure:7591: checking for ANSI C header files
# configure:7611: gcc -c conftest.c >&5
# configure:7611: $? = 0
# configure:7684: gcc -o conftest conftest.c >&5
# configure:7684: $? = 0
# configure:7684: ./conftest
# configure:7684: $? = 0
# configure:7695: result: yes
# configure:7708: checking for sys/types.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for sys/stat.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for stdlib.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for string.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for memory.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for strings.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for inttypes.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for stdint.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7708: checking for unistd.h
# configure:7708: gcc -c conftest.c >&5
# configure:7708: $? = 0
# configure:7708: result: yes
# configure:7722: checking for dlfcn.h
# configure:7722: gcc -c conftest.c >&5
# configure:7722: $? = 0
# configure:7722: result: yes
# configure:8276: checking for objdir
# configure:8291: result: .libs
# configure:8555: checking if gcc supports -fno-rtti -fno-exceptions
# configure:8573: gcc -c -fno-rtti -fno-exceptions conftest.c >&5
# cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C
# configure:8577: $? = 0
# configure:8590: result: no
# configure:8948: checking for gcc option to produce PIC
# configure:8955: result: -fPIC -DPIC
# configure:8963: checking if gcc PIC flag -fPIC -DPIC works
# configure:8981: gcc -c -fPIC -DPIC -DPIC conftest.c >&5
# configure:8985: $? = 0
# configure:8998: result: yes
# configure:9027: checking if gcc static flag -static works
# configure:9055: result: yes
# configure:9070: checking if gcc supports -c -o file.o
# configure:9091: gcc -c -o out/conftest2.o conftest.c >&5
# configure:9095: $? = 0
# configure:9117: result: yes
# configure:9125: checking if gcc supports -c -o file.o
# configure:9172: result: yes
# configure:9205: checking whether the gcc linker (/usr/sbin/ld -m elf_x86_64) supports shared libraries
# configure:10464: result: yes
# configure:10501: checking whether -lc should be explicitly linked in
# configure:10509: gcc -c conftest.c >&5
# configure:10512: $? = 0
# configure:10527: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /usr/sbin/grep -lc \>/dev/null 2\>\&1
# configure:10530: $? = 0
# configure:10544: result: no
# configure:10704: checking dynamic linker characteristics
# configure:11285: gcc -o conftest -Wl,-rpath -Wl,/foo conftest.c >&5
# configure:11285: $? = 0
# configure:11522: result: GNU/Linux ld.so
# configure:11644: checking how to hardcode library paths into programs
# configure:11669: result: immediate
# configure:12217: checking whether stripping libraries is possible
# configure:12222: result: yes
# configure:12257: checking if libtool supports shared libraries
# configure:12259: result: yes
# configure:12262: checking whether to build shared libraries
# configure:12287: result: yes
# configure:12290: checking whether to build static libraries
# configure:12294: result: no
# configure:12346: checking for x86_64-unknown-linux-g++
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-c++
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-gpp
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-aCC
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-CC
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-cxx
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-cc++
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-cl.exe
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-FCC
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-KCC
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-RCC
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-xlC_r
# configure:12376: result: no
# configure:12346: checking for x86_64-unknown-linux-xlC
# configure:12376: result: no
# configure:12390: checking for g++
# configure:12406: found /usr/sbin/g++
# configure:12417: result: g++
# configure:12444: checking for C++ compiler version
# configure:12453: g++ --version >&5
# g++ (GCC) 6.1.1 20160602
# Copyright (C) 2016 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# configure:12464: $? = 0
# configure:12453: g++ -v >&5
# Using built-in specs.
# COLLECT_GCC=g++
# COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/6.1.1/lto-wrapper
# Target: x86_64-pc-linux-gnu
# Configured with: /build/gcc/src/gcc/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --disable-multilib --disable-werror --enable-checking=release
# Thread model: posix
# gcc version 6.1.1 20160602 (GCC)
# configure:12464: $? = 0
# configure:12453: g++ -V >&5
# g++: error: unrecognized command line option '-V'
# g++: fatal error: no input files
# compilation terminated.
# configure:12464: $? = 1
# configure:12453: g++ -qversion >&5
# g++: error: unrecognized command line option '-qversion'; did you mean '--version'?
# g++: fatal error: no input files
# compilation terminated.
# configure:12464: $? = 1
# configure:12468: checking whether we are using the GNU C++ compiler
# configure:12487: g++ -c -std=c++1z conftest.cpp >&5
# configure:12487: $? = 0
# configure:12496: result: yes
# configure:12505: checking whether g++ accepts -g
# configure:12525: g++ -c -g conftest.cpp >&5
# configure:12525: $? = 0
# configure:12566: result: yes
# configure:12591: checking dependency style of g++
# configure:12702: result: gcc3
# configure:12735: checking how to run the C++ preprocessor
# configure:12762: g++ -E conftest.cpp
# configure:12762: $? = 0
# configure:12776: g++ -E conftest.cpp
# conftest.cpp:21:28: fatal error: ac_nonexistent.h: No such file or directory
# #include
# ^
# compilation terminated.
# configure:12776: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# configure:12801: result: g++ -E
# configure:12821: g++ -E conftest.cpp
# configure:12821: $? = 0
# configure:12835: g++ -E conftest.cpp
# conftest.cpp:21:28: fatal error: ac_nonexistent.h: No such file or directory
# #include
# ^
# compilation terminated.
# configure:12835: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# configure:12997: checking for ld used by g++
# configure:13064: result: /usr/sbin/ld -m elf_x86_64
# configure:13071: checking if the linker (/usr/sbin/ld -m elf_x86_64) is GNU ld
# configure:13086: result: yes
# configure:13141: checking whether the g++ linker (/usr/sbin/ld -m elf_x86_64) supports shared libraries
# configure:14214: result: yes
# configure:14250: g++ -c -std=c++1z conftest.cpp >&5
# configure:14253: $? = 0
# configure:14734: checking for g++ option to produce PIC
# configure:14741: result: -fPIC -DPIC
# configure:14749: checking if g++ PIC flag -fPIC -DPIC works
# configure:14767: g++ -c -std=c++1z -fPIC -DPIC -DPIC conftest.cpp >&5
# configure:14771: $? = 0
# configure:14784: result: yes
# configure:14807: checking if g++ static flag -static works
# configure:14835: result: yes
# configure:14847: checking if g++ supports -c -o file.o
# configure:14868: g++ -c -std=c++1z -o out/conftest2.o conftest.cpp >&5
# configure:14872: $? = 0
# configure:14894: result: yes
# configure:14899: checking if g++ supports -c -o file.o
# configure:14946: result: yes
# configure:14976: checking whether the g++ linker (/usr/sbin/ld -m elf_x86_64) supports shared libraries
# configure:15016: result: yes
# configure:15157: checking dynamic linker characteristics
# configure:15902: result: GNU/Linux ld.so
# configure:15967: checking how to hardcode library paths into programs
# configure:15992: result: immediate
# configure:16174: checking if compiler needs -Werror to reject unknown flags
# configure:16190: gcc -c -Werror -Wunknown-warning-option -Wsizeof-array-argument conftest.c >&5
# gcc: error: unrecognized command line option '-Wunknown-warning-option'; did you mean '-Wno-warning-token'?
# configure:16190: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | int foo(void);
# | int
# | main ()
# | {
# | foo()
# | ;
# | return 0;
# | }
# configure:16195: result: no
# configure:16261: checking for the pthreads library -lpthreads
# configure:16299: gcc -o conftest conftest.c -lpthreads >&5
# /usr/sbin/ld: cannot find -lpthreads
# collect2: error: ld returned 1 exit status
# configure:16299: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# | static void routine(void *a) { a = 0; }
# | static void *start_routine(void *a) { return a; }
# | int
# | main ()
# | {
# | pthread_t th; pthread_attr_t attr;
# | pthread_create(&th, 0, start_routine, 0);
# | pthread_join(th, 0);
# | pthread_attr_init(&attr);
# | pthread_cleanup_push(routine, 0);
# | pthread_cleanup_pop(0) /* ; */
# | ;
# | return 0;
# | }
# configure:16308: result: no
# configure:16206: checking whether pthreads work without any flags
# configure:16299: gcc -o conftest conftest.c >&5
# /tmp/ccPWdI9s.o: In function `main':
# conftest.c:(.text+0x43): undefined reference to `pthread_create'
# conftest.c:(.text+0x54): undefined reference to `pthread_join'
# conftest.c:(.text+0xbc): undefined reference to `__pthread_register_cancel'
# conftest.c:(.text+0xcb): undefined reference to `__pthread_unregister_cancel'
# collect2: error: ld returned 1 exit status
# configure:16299: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# | static void routine(void *a) { a = 0; }
# | static void *start_routine(void *a) { return a; }
# | int
# | main ()
# | {
# | pthread_t th; pthread_attr_t attr;
# | pthread_create(&th, 0, start_routine, 0);
# | pthread_join(th, 0);
# | pthread_attr_init(&attr);
# | pthread_cleanup_push(routine, 0);
# | pthread_cleanup_pop(0) /* ; */
# | ;
# | return 0;
# | }
# configure:16308: result: no
# configure:16211: checking whether pthreads work with -Kthread
# configure:16299: gcc -o conftest -Kthread conftest.c >&5
# gcc: error: unrecognized command line option '-Kthread'; did you mean '-pthread'?
# configure:16299: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# | static void routine(void *a) { a = 0; }
# | static void *start_routine(void *a) { return a; }
# | int
# | main ()
# | {
# | pthread_t th; pthread_attr_t attr;
# | pthread_create(&th, 0, start_routine, 0);
# | pthread_join(th, 0);
# | pthread_attr_init(&attr);
# | pthread_cleanup_push(routine, 0);
# | pthread_cleanup_pop(0) /* ; */
# | ;
# | return 0;
# | }
# configure:16308: result: no
# configure:16211: checking whether pthreads work with -kthread
# configure:16299: gcc -o conftest -kthread conftest.c >&5
# gcc: error: unrecognized command line option '-kthread'; did you mean '-pthread'?
# configure:16299: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# | static void routine(void *a) { a = 0; }
# | static void *start_routine(void *a) { return a; }
# | int
# | main ()
# | {
# | pthread_t th; pthread_attr_t attr;
# | pthread_create(&th, 0, start_routine, 0);
# | pthread_join(th, 0);
# | pthread_attr_init(&attr);
# | pthread_cleanup_push(routine, 0);
# | pthread_cleanup_pop(0) /* ; */
# | ;
# | return 0;
# | }
# configure:16308: result: no
# configure:16261: checking for the pthreads library -llthread
# configure:16299: gcc -o conftest conftest.c -llthread >&5
# /usr/sbin/ld: cannot find -llthread
# collect2: error: ld returned 1 exit status
# configure:16299: $? = 1
# configure: failed program was:
# | /* confdefs.h */
# | #define PACKAGE_NAME "zimg"
# | #define PACKAGE_TARNAME "zimg"
# | #define PACKAGE_VERSION "2.1.0"
# | #define PACKAGE_STRING "zimg 2.1.0"
# | #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# | #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# | #define STDC_HEADERS 1
# | #define HAVE_SYS_TYPES_H 1
# | #define HAVE_SYS_STAT_H 1
# | #define HAVE_STDLIB_H 1
# | #define HAVE_STRING_H 1
# | #define HAVE_MEMORY_H 1
# | #define HAVE_STRINGS_H 1
# | #define HAVE_INTTYPES_H 1
# | #define HAVE_STDINT_H 1
# | #define HAVE_UNISTD_H 1
# | #define HAVE_DLFCN_H 1
# | #define LT_OBJDIR ".libs/"
# | /* end confdefs.h. */
# | #include
# | static void routine(void *a) { a = 0; }
# | static void *start_routine(void *a) { return a; }
# | int
# | main ()
# | {
# | pthread_t th; pthread_attr_t attr;
# | pthread_create(&th, 0, start_routine, 0);
# | pthread_join(th, 0);
# | pthread_attr_init(&attr);
# | pthread_cleanup_push(routine, 0);
# | pthread_cleanup_pop(0) /* ; */
# | ;
# | return 0;
# | }
# configure:16308: result: no
# configure:16211: checking whether pthreads work with -pthread
# configure:16299: gcc -o conftest -pthread conftest.c >&5
# configure:16299: $? = 0
# configure:16308: result: yes
# configure:16327: checking for joinable pthread attribute
# configure:16342: gcc -o conftest -pthread conftest.c >&5
# configure:16342: $? = 0
# configure:16348: result: PTHREAD_CREATE_JOINABLE
# configure:16358: checking if more special flags are required for pthreads
# configure:16373: result: no
# configure:16379: checking for PTHREAD_PRIO_INHERIT
# configure:16396: gcc -o conftest -pthread conftest.c >&5
# configure:16396: $? = 0
# configure:16405: result: yes
# configure:16758: checking that generated files are newer than configure
# configure:16764: result: done
# configure:16807: creating ./config.status
#
# ## ---------------------- ##
# ## Running config.status. ##
# ## ---------------------- ##
#
# This file was extended by zimg config.status 2.1.0, which was
# generated by GNU Autoconf 2.69. Invocation command line was
#
# CONFIG_FILES =
# CONFIG_HEADERS =
# CONFIG_LINKS =
# CONFIG_COMMANDS =
# $ ./config.status
#
# on 284929bad798
#
# config.status:1089: creating Makefile
# config.status:1089: creating zimg.pc
# config.status:1261: executing depfiles commands
# config.status:1261: executing libtool commands
#
# ## ---------------- ##
# ## Cache variables. ##
# ## ---------------- ##
#
# ac_cv_build=x86_64-unknown-linux-gnu
# ac_cv_c_compiler_gnu=yes
# ac_cv_cxx_compiler_gnu=yes
# ac_cv_env_CCC_set=
# ac_cv_env_CCC_value=
# ac_cv_env_CC_set=
# ac_cv_env_CC_value=
# ac_cv_env_CFLAGS_set=set
# ac_cv_env_CFLAGS_value=
# ac_cv_env_CPPFLAGS_set=set
# ac_cv_env_CPPFLAGS_value=
# ac_cv_env_CPP_set=
# ac_cv_env_CPP_value=
# ac_cv_env_CXXCPP_set=
# ac_cv_env_CXXCPP_value=
# ac_cv_env_CXXFLAGS_set=set
# ac_cv_env_CXXFLAGS_value=' -std=c++1z'
# ac_cv_env_CXX_set=
# ac_cv_env_CXX_value=
# ac_cv_env_LDFLAGS_set=set
# ac_cv_env_LDFLAGS_value=
# ac_cv_env_LIBS_set=
# ac_cv_env_LIBS_value=
# ac_cv_env_LT_SYS_LIBRARY_PATH_set=
# ac_cv_env_LT_SYS_LIBRARY_PATH_value=
# ac_cv_env_build_alias_set=
# ac_cv_env_build_alias_value=
# ac_cv_env_host_alias_set=set
# ac_cv_env_host_alias_value=x86_64-unknown-linux
# ac_cv_env_target_alias_set=
# ac_cv_env_target_alias_value=
# ac_cv_header_dlfcn_h=yes
# ac_cv_header_inttypes_h=yes
# ac_cv_header_memory_h=yes
# ac_cv_header_stdc=yes
# ac_cv_header_stdint_h=yes
# ac_cv_header_stdlib_h=yes
# ac_cv_header_string_h=yes
# ac_cv_header_strings_h=yes
# ac_cv_header_sys_stat_h=yes
# ac_cv_header_sys_types_h=yes
# ac_cv_header_unistd_h=yes
# ac_cv_host=x86_64-unknown-linux-gnu
# ac_cv_objext=o
# ac_cv_path_EGREP='/usr/sbin/grep -E'
# ac_cv_path_FGREP='/usr/sbin/grep -F'
# ac_cv_path_GREP=/usr/sbin/grep
# ac_cv_path_SED=/usr/sbin/sed
# ac_cv_path_install='/usr/bin/install -c'
# ac_cv_path_lt_DD=/usr/sbin/dd
# ac_cv_path_mkdir=/usr/sbin/mkdir
# ac_cv_prog_AWK=gawk
# ac_cv_prog_CPP='gcc -E'
# ac_cv_prog_CXXCPP='g++ -E'
# ac_cv_prog_STRIP=strip
# ac_cv_prog_ac_ct_AR=ar
# ac_cv_prog_ac_ct_CC=gcc
# ac_cv_prog_ac_ct_CXX=g++
# ac_cv_prog_ac_ct_OBJDUMP=objdump
# ac_cv_prog_ac_ct_RANLIB=ranlib
# ac_cv_prog_ac_ct_STRIP=strip
# ac_cv_prog_cc_c89=
# ac_cv_prog_cc_g=yes
# ac_cv_prog_cxx_g=yes
# ac_cv_prog_make_make_set=yes
# am_cv_CC_dependencies_compiler_type=gcc3
# am_cv_CXX_dependencies_compiler_type=gcc3
# am_cv_make_support_nested_variables=yes
# am_cv_prog_cc_c_o=yes
# ax_cv_PTHREAD_PRIO_INHERIT=yes
# lt_cv_ar_at_file=@
# lt_cv_archive_cmds_need_lc=no
# lt_cv_deplibs_check_method=pass_all
# lt_cv_file_magic_cmd='$MAGIC_CMD'
# lt_cv_file_magic_test_file=
# lt_cv_ld_reload_flag=-r
# lt_cv_nm_interface='BSD nm'
# lt_cv_objdir=.libs
# lt_cv_path_LD=/usr/sbin/ld
# lt_cv_path_LDCXX='/usr/sbin/ld -m elf_x86_64'
# lt_cv_path_NM='/usr/sbin/nm -B'
# lt_cv_path_mainfest_tool=no
# lt_cv_prog_compiler_c_o=yes
# lt_cv_prog_compiler_c_o_CXX=yes
# lt_cv_prog_compiler_pic='-fPIC -DPIC'
# lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC'
# lt_cv_prog_compiler_pic_works=yes
# lt_cv_prog_compiler_pic_works_CXX=yes
# lt_cv_prog_compiler_rtti_exceptions=no
# lt_cv_prog_compiler_static_works=yes
# lt_cv_prog_compiler_static_works_CXX=yes
# lt_cv_prog_gnu_ld=yes
# lt_cv_prog_gnu_ldcxx=yes
# lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
# lt_cv_shlibpath_overrides_runpath=no
# lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
# lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\'''
# lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\'''
# lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
# lt_cv_sys_global_symbol_to_import=
# lt_cv_sys_max_cmd_len=1572864
# lt_cv_to_host_file_cmd=func_convert_file_noop
# lt_cv_to_tool_file_cmd=func_convert_file_noop
# lt_cv_truncate_bin='/usr/sbin/dd bs=4096 count=1'
#
# ## ----------------- ##
# ## Output variables. ##
# ## ----------------- ##
#
# ACLOCAL='${SHELL} /tmp/zimg/src/zimg-release-2.1/missing aclocal-1.15'
# AMDEPBACKSLASH='\'
# AMDEP_FALSE='#'
# AMDEP_TRUE=''
# AMTAR='$${TAR-tar}'
# AM_BACKSLASH='\'
# AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
# AM_DEFAULT_VERBOSITY='0'
# AM_V='$(V)'
# AR='ar'
# AS='as'
# AUTOCONF='${SHELL} /tmp/zimg/src/zimg-release-2.1/missing autoconf'
# AUTOHEADER='${SHELL} /tmp/zimg/src/zimg-release-2.1/missing autoheader'
# AUTOMAKE='${SHELL} /tmp/zimg/src/zimg-release-2.1/missing automake-1.15'
# AWK='gawk'
# CC='gcc'
# CCDEPMODE='depmode=gcc3'
# CFLAGS=''
# CONFIG_SUBDIRS=''
# CPP='gcc -E'
# CPPFLAGS=''
# CXX='g++'
# CXXCPP='g++ -E'
# CXXDEPMODE='depmode=gcc3'
# CXXFLAGS=' -std=c++1z'
# CYGPATH_W='echo'
# DEBUGCFLAGS='-DNDEBUG'
# DEFS='-DPACKAGE_NAME=\"zimg\" -DPACKAGE_TARNAME=\"zimg\" -DPACKAGE_VERSION=\"2.1.0\" -DPACKAGE_STRING=\"zimg\ 2.1.0\" -DPACKAGE_BUGREPORT=\"https://github.com/sekrit-twc/zimg/pulls\" -DPACKAGE_URL=\"https://github.com/sekrit-twc/zimg\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_PTHREAD_PRIO_INHERIT=1 -DHAVE_PTHREAD=1 -DZIMG_X86=1'
# DEPDIR='.deps'
# DLLTOOL='false'
# DSYMUTIL=''
# DUMPBIN=''
# ECHO_C=''
# ECHO_N='-n'
# ECHO_T=''
# EGREP='/usr/sbin/grep -E'
# EXAMPLES_FALSE=''
# EXAMPLES_TRUE='#'
# EXEEXT=''
# FGREP='/usr/sbin/grep -F'
# GREP='/usr/sbin/grep'
# INSTALL_DATA='${INSTALL} -m 644'
# INSTALL_PROGRAM='${INSTALL}'
# INSTALL_SCRIPT='${INSTALL}'
# INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
# LD='/usr/sbin/ld -m elf_x86_64'
# LDFLAGS=''
# LIBOBJS=''
# LIBS=''
# LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# LIPO=''
# LN_S='ln -s'
# LTLIBOBJS=''
# LT_SYS_LIBRARY_PATH=''
# MAKEINFO='${SHELL} /tmp/zimg/src/zimg-release-2.1/missing makeinfo'
# MANIFEST_TOOL=':'
# MKDIR_P='/usr/sbin/mkdir -p'
# NM='/usr/sbin/nm -B'
# NMEDIT=''
# OBJDUMP='objdump'
# OBJEXT='o'
# OTOOL64=''
# OTOOL=''
# PACKAGE='zimg'
# PACKAGE_BUGREPORT='https://github.com/sekrit-twc/zimg/pulls'
# PACKAGE_NAME='zimg'
# PACKAGE_STRING='zimg 2.1.0'
# PACKAGE_TARNAME='zimg'
# PACKAGE_URL='https://github.com/sekrit-twc/zimg'
# PACKAGE_VERSION='2.1.0'
# PATH_SEPARATOR=':'
# PTHREAD_CC='gcc'
# PTHREAD_CFLAGS='-pthread'
# PTHREAD_LIBS=''
# RANLIB='ranlib'
# SED='/usr/sbin/sed'
# SET_MAKE=''
# SHELL='/bin/sh'
# STL_LIBS='-lstdc++'
# STRIP='strip'
# TESTAPP_FALSE=''
# TESTAPP_TRUE='#'
# UNIT_TEST_FALSE=''
# UNIT_TEST_TRUE='#'
# VERSION='2.1.0'
# X86SIMD_FALSE='#'
# X86SIMD_TRUE=''
# ac_ct_AR='ar'
# ac_ct_CC='gcc'
# ac_ct_CXX='g++'
# ac_ct_DUMPBIN=''
# am__EXEEXT_FALSE=''
# am__EXEEXT_TRUE='#'
# am__fastdepCC_FALSE='#'
# am__fastdepCC_TRUE=''
# am__fastdepCXX_FALSE='#'
# am__fastdepCXX_TRUE=''
# am__include='include'
# am__isrc=''
# am__leading_dot='.'
# am__nodep='_no'
# am__quote=''
# am__tar='$${TAR-tar} chof - "$$tardir"'
# am__untar='$${TAR-tar} xf -'
# ax_pthread_config=''
# bindir='${exec_prefix}/bin'
# build='x86_64-unknown-linux-gnu'
# build_alias=''
# build_cpu='x86_64'
# build_os='linux-gnu'
# build_vendor='unknown'
# datadir='${datarootdir}'
# datarootdir='${prefix}/share'
# docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
# dvidir='${docdir}'
# exec_prefix='${prefix}'
# host='x86_64-unknown-linux-gnu'
# host_alias='x86_64-unknown-linux'
# host_cpu='x86_64'
# host_os='linux-gnu'
# host_vendor='unknown'
# htmldir='${docdir}'
# includedir='${prefix}/include'
# infodir='${datarootdir}/info'
# install_sh='${SHELL} /tmp/zimg/src/zimg-release-2.1/install-sh'
# libdir='${exec_prefix}/lib'
# libexecdir='${exec_prefix}/libexec'
# localedir='${datarootdir}/locale'
# localstatedir='${prefix}/var'
# mandir='${datarootdir}/man'
# mkdir_p='$(MKDIR_P)'
# oldincludedir='/usr/include'
# pdfdir='${docdir}'
# prefix='/usr'
# program_transform_name='s,x,x,'
# psdir='${docdir}'
# sbindir='${exec_prefix}/sbin'
# sharedstatedir='${prefix}/com'
# subdirs=''
# sysconfdir='${prefix}/etc'
# target_alias=''
#
# ## ----------- ##
# ## confdefs.h. ##
# ## ----------- ##
#
# /* confdefs.h */
# #define PACKAGE_NAME "zimg"
# #define PACKAGE_TARNAME "zimg"
# #define PACKAGE_VERSION "2.1.0"
# #define PACKAGE_STRING "zimg 2.1.0"
# #define PACKAGE_BUGREPORT "https://github.com/sekrit-twc/zimg/pulls"
# #define PACKAGE_URL "https://github.com/sekrit-twc/zimg"
# #define STDC_HEADERS 1
# #define HAVE_SYS_TYPES_H 1
# #define HAVE_SYS_STAT_H 1
# #define HAVE_STDLIB_H 1
# #define HAVE_STRING_H 1
# #define HAVE_MEMORY_H 1
# #define HAVE_STRINGS_H 1
# #define HAVE_INTTYPES_H 1
# #define HAVE_STDINT_H 1
# #define HAVE_UNISTD_H 1
# #define HAVE_DLFCN_H 1
# #define LT_OBJDIR ".libs/"
# #define HAVE_PTHREAD_PRIO_INHERIT 1
# #define HAVE_PTHREAD 1
# #define ZIMG_X86 1
#
# configure: exit 0