The build took 00h 00m 58s and was SUCCESSFUL.
The program in this build is written in the following languages, according to sloccount:
| SLOC | Language |
|---|---|
1,156 |
ansic |
734 |
makefile |
391 |
perl |
2,281 |
total |
The process tree of the build process is here.
To avoid scrolling, you may jump to the last line of the
invocation of makepkg that was used to build this
package.
Removed vanilla repositories from pacman.conf and added:
CMD: sudo -u tuscan red makepkg --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
==> Making package: perl-io-tty 1.12-3 (Wed Aug 24 12:51:16 UTC 2016)==> Checking runtime dependencies...==> Checking buildtime dependencies...==> WARNING: Using existing $srcdir/ tree==> Starting build()...Now let's see what we can find out about your system(logfiles of failing tests are available in the conf/ dir)...Looking for _getpty()...... not found.Looking for getpt()........ FOUND.Looking for grantpt()...... FOUND.Looking for openpty()...... not found.Looking for posix_openpt(). FOUND.Looking for ptsname()...... FOUND.Looking for ptsname_r().... FOUND.Looking for sigaction().... FOUND.Looking for strlcpy()...... not found.Looking for ttyname()...... FOUND.Looking for unlockpt()..... FOUND.Looking for libutil.h...... not found.Looking for pty.h.......... FOUND.Looking for sys/pty.h...... not found.Looking for sys/ptyio.h.... not found.Looking for sys/stropts.h.. FOUND.Looking for termio.h....... FOUND.Looking for termios.h...... FOUND.Looking for util.h......... not found.Checking which symbols compile OK...(sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...)+B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS >>> Configuration looks good! <<<Writing IO::Tty::Constant.pm...DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPTChecking if your kit is complete...Looks goodGenerating a Unix-style MakefileWriting Makefile for IO::TtyWriting MYMETA.yml and MYMETA.jsonRunning Mkbootstrap for IO::Tty ()chmod 644 "Tty.bs""/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap "/usr/share/perl5/core_perl/ExtUtils/typemap" Tty.xs > Tty.xsc && mv Tty.xsc Tty.ccp Tty/Constant.pm blib/lib/IO/Tty/Constant.pmcp Pty.pm blib/lib/IO/Pty.pmcp Tty.pm blib/lib/IO/Tty.pmcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib/perl5/core_perl/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.crm -f blib/arch/auto/IO/Tty/Tty.socc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro -L/usr/local/lib -fstack-protector-strong Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ \ chmod 755 blib/arch/auto/IO/Tty/Tty.so"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644Manifying 3 pod documents==> Entering fakeroot environment...==> Starting package()...Running Mkbootstrap for IO::Tty ()chmod 644 "Tty.bs"Manifying 3 pod documentsAppending installation info to /tmp/perl-io-tty/pkg/perl-io-tty/usr/lib/perl5/core_perl/perllocal.podFiles found in blib/arch: installing files in blib/lib into architecture dependent library treeInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/lib/perl5/vendor_perl/auto/IO/Tty/Tty.soInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/lib/perl5/vendor_perl/IO/Pty.pmInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/lib/perl5/vendor_perl/IO/Tty.pmInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/lib/perl5/vendor_perl/IO/Tty/Constant.pmInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/share/man/man3/IO::Pty.3pmInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/share/man/man3/IO::Tty.3pmInstalling /tmp/perl-io-tty/pkg/perl-io-tty/usr/share/man/man3/IO::Tty::Constant.3pm==> Tidying install... -> Removing doc files... -> Removing empty directories... -> Purging unwanted files...==> Checking for packaging issue...==> Creating package "perl-io-tty"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file...error: invalid option '--noprogressbar' -> Generating .MTREE file... -> Compressing package...==> Leaving fakeroot environment.==> Finished making: perl-io-tty 1.12-3 (Wed Aug 24 12:51:27 UTC 2016)CMD: pacman --query --file perl-io-tty-1.12-3-x86_64.pkg.tar.xz
Creating hybrid package for 'perl-io-tty'
Trying to find vanilla package 'perl-io-tty'...
CMD: pacman --query --file /mirror/perl-io-tty-1.12-3.pkg.tar.xz
Package file has the following structure:
/.PKGINFO/.BUILDINFO/.MTREE/usr/share/man/man3/IO::Pty.3pm.gz/usr/share/man/man3/IO::Tty.3pm.gz/usr/share/man/man3/IO::Tty::Constant.3pm.gz/usr/lib/perl5/vendor_perl/IO/Tty.pm/usr/lib/perl5/vendor_perl/IO/Pty.pm/usr/lib/perl5/vendor_perl/IO/Tty/Constant.pm/usr/lib/perl5/vendor_perl/auto/IO/Tty/Tty.so/sysroot/usr/lib/perl5/vendor_perl/IO/Pty.pm/sysroot/usr/lib/perl5/vendor_perl/IO/Tty.pm/sysroot/usr/lib/perl5/vendor_perl/IO/Tty/Constant.pm/sysroot/usr/lib/perl5/vendor_perl/auto/IO/Tty/Tty.soGenerating .MTREE
CMD: bsdtar -czf .MTREE --format=mtree --options=!all,use-set,type,uid,mode,time,size,md5,sha256,link .PKGINFO .BUILDINFO usr sysroot
Tar-ing up files
CMD: bsdtar -cf - .PKGINFO .BUILDINFO usr sysroot .MTREE
CMD: xz -c -z
Successfully ran bsdtar -cf - .PKGINFO .BUILDINFO usr sysroot .MTREE | xz -c -z
CMD: bsdtar -tqf perl-io-tty.pkg.tar.xz .PKGINFO
Created package at path /var/cache/pacman/pkg/perl-io-tty.pkg.tar.xz
Attempting to access local repository, attempt 1
CMD: repo-add /var/cache/pacman/pkg/tuscan.db.tar /var/cache/pacman/pkg/perl-io-tty.pkg.tar.xz
Attempting to access local repository, attempt 2
CMD: repo-add /var/cache/pacman/pkg/tuscan.db.tar /var/cache/pacman/pkg/perl-io-tty.pkg.tar.xz
Attempting to access local repository, attempt 3
CMD: repo-add /var/cache/pacman/pkg/tuscan.db.tar /var/cache/pacman/pkg/perl-io-tty.pkg.tar.xz
==> Extracting database to a temporary location...==> Extracting database to a temporary location...==> Adding package '/var/cache/pacman/pkg/perl-io-tty.pkg.tar.xz' -> Computing checksums... -> Creating 'desc' db entry... -> Creating 'files' db entry...==> Creating updated database file '/var/cache/pacman/pkg/tuscan.db.tar'