Build of dbus-sharp with vanilla toolchain

The build took 00h 00m 05s and was NOT successful.

The program in this build is written in the following languages, according to sloccount:

SLOCLanguage
7,711 cs
494 sh
8,205 total

The process tree of the build process is here.

Due to the failure of this package to build, we did not attempt to build several packages that depend on this one. Those packages are:

List of Errors

Log

To avoid scrolling, you may jump to the last line of the invocation of makepkg that was used to build this package.

Removed vanilla repositories from pacman.conf and added:
# [tuscan]
# Server = file:///var/cache/pacman/pkg/

CMD: pacman -Syy --noconfirm
# :: Synchronizing package databases...
# downloading tuscan.db...

CMD: sudo -u tuscan red makepkg --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
# ==> Making package: dbus-sharp 0.8.1-1 (Wed Aug 24 13:25:39 UTC 2016)
# ==> Checking runtime dependencies...
# ==> Checking buildtime dependencies...
# ==> WARNING: Using existing $srcdir/ tree
# ==> Starting build()...
# checking for a BSD-compatible install... /usr/bin/install -c
# checking whether build environment is sane... yes
# checking for x86_64-unknown-linux-strip... no
# checking for strip... strip
# checking for a thread-safe mkdir -p... /usr/sbin/mkdir -p
# checking for gawk... gawk
# checking whether make sets $(MAKE)... yes
# checking whether make supports nested variables... yes
# checking whether to enable maintainer-specific portions of Makefiles... no
# checking for pkg-config... /usr/sbin/pkg-config
# checking for x86_64-unknown-linux-pkg-config... (cached) /usr/sbin/pkg-config
# checking pkg-config is at least version 0.9.0... yes
# checking for MONO... yes
# checking for gmcs... no
# configure: error: You need to install gmcs
# ==> ERROR: A failure occurred in build().
# Aborting...

Printing config logfiles

CMD: config logfiles '/tmp/dbus-sharp/src/dbus-sharp-0.8.1/config.log'
# This file contains any messages produced by compilers while
# running configure, to aid debugging if configure makes a mistake.
#
# It was created by dbus-sharp configure 0.8.1, which was
# generated by GNU Autoconf 2.69. Invocation command line was
#
# $ ./configure --host=x86_64-unknown-linux --prefix=/usr --sysconfdir=/etc --localstatedir=/var
#
# ## --------- ##
# ## Platform. ##
# ## --------- ##
#
# hostname = ad9ef3a76994
# uname -m = x86_64
# uname -r = 4.7.1-1-ARCH
# uname -s = Linux
# uname -v = #1 SMP PREEMPT Wed Aug 17 08:13:35 CEST 2016
#
# /usr/bin/uname -p = unknown
# /bin/uname -X = unknown
#
# /bin/arch = unknown
# /usr/bin/arch -k = unknown
# /usr/convex/getsysinfo = unknown
# /usr/bin/hostinfo = unknown
# /bin/machine = unknown
# /usr/bin/oslevel = unknown
# /bin/universe = unknown
#
# PATH: /usr/local/sbin
# PATH: /usr/local/bin
# PATH: /usr/sbin
# PATH: /usr/bin
# PATH: /sbin
# PATH: /bin
#
#
# ## ----------- ##
# ## Core tests. ##
# ## ----------- ##
#
# configure:1795: checking for a BSD-compatible install
# configure:1863: result: /usr/bin/install -c
# configure:1874: checking whether build environment is sane
# configure:1929: result: yes
# configure:1988: checking for x86_64-unknown-linux-strip
# configure:2018: result: no
# configure:2028: checking for strip
# configure:2044: found /usr/sbin/strip
# configure:2055: result: strip
# configure:2080: checking for a thread-safe mkdir -p
# configure:2119: result: /usr/sbin/mkdir -p
# configure:2126: checking for gawk
# configure:2142: found /usr/sbin/gawk
# configure:2153: result: gawk
# configure:2164: checking whether make sets $(MAKE)
# configure:2186: result: yes
# configure:2215: checking whether make supports nested variables
# configure:2232: result: yes
# configure:2359: checking whether to enable maintainer-specific portions of Makefiles
# configure:2368: result: no
# configure:2391: checking for pkg-config
# configure:2409: found /usr/sbin/pkg-config
# configure:2422: result: /usr/sbin/pkg-config
# configure:2447: checking for x86_64-unknown-linux-pkg-config
# configure:2477: result: /usr/sbin/pkg-config
# configure:2545: checking pkg-config is at least version 0.9.0
# configure:2548: result: yes
# configure:2558: checking for MONO
# configure:2565: $PKG_CONFIG --exists --print-errors "mono >= $MONO_REQ_VERSION"
# configure:2568: $? = 0
# configure:2582: $PKG_CONFIG --exists --print-errors "mono >= $MONO_REQ_VERSION"
# configure:2585: $? = 0
# configure:2643: result: yes
# configure:2650: checking for gmcs
# configure:2681: result: no
# configure:2690: error: You need to install gmcs
#
# ## ---------------- ##
# ## Cache variables. ##
# ## ---------------- ##
#
# ac_cv_env_MONO_CFLAGS_set=
# ac_cv_env_MONO_CFLAGS_value=
# ac_cv_env_MONO_LIBS_set=
# ac_cv_env_MONO_LIBS_value=
# ac_cv_env_NUNIT_CFLAGS_set=
# ac_cv_env_NUNIT_CFLAGS_value=
# ac_cv_env_NUNIT_LIBS_set=
# ac_cv_env_NUNIT_LIBS_value=
# ac_cv_env_PKG_CONFIG_LIBDIR_set=
# ac_cv_env_PKG_CONFIG_LIBDIR_value=
# ac_cv_env_PKG_CONFIG_PATH_set=
# ac_cv_env_PKG_CONFIG_PATH_value=
# ac_cv_env_PKG_CONFIG_set=
# ac_cv_env_PKG_CONFIG_value=
# ac_cv_env_build_alias_set=
# ac_cv_env_build_alias_value=
# ac_cv_env_host_alias_set=set
# ac_cv_env_host_alias_value=x86_64-unknown-linux
# ac_cv_env_target_alias_set=
# ac_cv_env_target_alias_value=
# ac_cv_path_GMCS=no
# ac_cv_path_PKG_CONFIG=/usr/sbin/pkg-config
# ac_cv_path_install='/usr/bin/install -c'
# ac_cv_path_mkdir=/usr/sbin/mkdir
# ac_cv_prog_AWK=gawk
# ac_cv_prog_ac_ct_STRIP=strip
# ac_cv_prog_make_make_set=yes
# am_cv_make_support_nested_variables=yes
# pkg_cv_MONO_CFLAGS=
# pkg_cv_MONO_LIBS=
#
# ## ----------------- ##
# ## Output variables. ##
# ## ----------------- ##
#
# ACLOCAL='${SHELL} /tmp/dbus-sharp/src/dbus-sharp-0.8.1/missing aclocal-1.14'
# AMTAR='$${TAR-tar}'
# AM_BACKSLASH='\'
# AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
# AM_DEFAULT_VERBOSITY='1'
# AM_V='$(V)'
# API_VERSION='2.0'
# AUTOCONF='${SHELL} /tmp/dbus-sharp/src/dbus-sharp-0.8.1/missing autoconf'
# AUTOHEADER='${SHELL} /tmp/dbus-sharp/src/dbus-sharp-0.8.1/missing autoheader'
# AUTOMAKE='${SHELL} /tmp/dbus-sharp/src/dbus-sharp-0.8.1/missing automake-1.14'
# AWK='gawk'
# CYGPATH_W='echo'
# DEFS=''
# ECHO_C=''
# ECHO_N='-n'
# ECHO_T=''
# ENABLE_TESTS_FALSE=''
# ENABLE_TESTS_TRUE=''
# GACUTIL=''
# GMCS='no'
# INSTALL_DATA='${INSTALL} -m 644'
# INSTALL_PROGRAM='${INSTALL}'
# INSTALL_SCRIPT='${INSTALL}'
# INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
# LIBOBJS=''
# LIBS=''
# LTLIBOBJS=''
# MAINT='#'
# MAINTAINER_MODE_FALSE=''
# MAINTAINER_MODE_TRUE='#'
# MAKEINFO='${SHELL} /tmp/dbus-sharp/src/dbus-sharp-0.8.1/missing makeinfo'
# MKDIR_P='/usr/sbin/mkdir -p'
# MONO_CFLAGS=''
# MONO_LIBS=''
# NUNIT_CFLAGS=''
# NUNIT_LIBS=''
# PACKAGE='dbus-sharp'
# PACKAGE_BUGREPORT=''
# PACKAGE_NAME='dbus-sharp'
# PACKAGE_STRING='dbus-sharp 0.8.1'
# PACKAGE_TARNAME='dbus-sharp'
# PACKAGE_URL=''
# PACKAGE_VERSION='0.8.1'
# PATH_SEPARATOR=':'
# PKG_CONFIG='/usr/sbin/pkg-config'
# PKG_CONFIG_LIBDIR=''
# PKG_CONFIG_PATH=''
# SET_MAKE=''
# SHELL='/bin/sh'
# STRIP='strip'
# VERSION='0.8.1'
# XBUILD=''
# am__isrc=''
# am__leading_dot='.'
# am__tar='$${TAR-tar} chof - "$$tardir"'
# am__untar='$${TAR-tar} xf -'
# bindir='${exec_prefix}/bin'
# build_alias=''
# datadir='${datarootdir}'
# datarootdir='${prefix}/share'
# docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
# dvidir='${docdir}'
# exec_prefix='NONE'
# host_alias='x86_64-unknown-linux'
# htmldir='${docdir}'
# includedir='${prefix}/include'
# infodir='${datarootdir}/info'
# install_sh='${SHELL} /tmp/dbus-sharp/src/dbus-sharp-0.8.1/install-sh'
# libdir='${exec_prefix}/lib'
# libexecdir='${exec_prefix}/libexec'
# localedir='${datarootdir}/locale'
# localstatedir='/var'
# mandir='${datarootdir}/man'
# mkdir_p='$(MKDIR_P)'
# oldincludedir='/usr/include'
# pdfdir='${docdir}'
# prefix='/usr'
# program_transform_name='s,x,x,'
# psdir='${docdir}'
# sbindir='${exec_prefix}/sbin'
# sharedstatedir='${prefix}/com'
# sysconfdir='/etc'
# target_alias=''
#
# ## ----------- ##
# ## confdefs.h. ##
# ## ----------- ##
#
# /* confdefs.h */
# #define PACKAGE_NAME "dbus-sharp"
# #define PACKAGE_TARNAME "dbus-sharp"
# #define PACKAGE_VERSION "0.8.1"
# #define PACKAGE_STRING "dbus-sharp 0.8.1"
# #define PACKAGE_BUGREPORT ""
# #define PACKAGE_URL ""
# #define PACKAGE "dbus-sharp"
# #define VERSION "0.8.1"
#
# configure: exit 1