The build took 00h 00m 49s and was SUCCESSFUL.
The program in this build is written in the following languages, according to sloccount:
SLOC | Language |
---|---|
3,384 |
perl |
625 |
sh |
535 |
makefile |
4,544 |
total |
The process tree of the build process is here.
To avoid scrolling, you may jump to the last line of the
invocation of makepkg
that was used to build this
package.
Removed vanilla repositories from pacman.conf and added:
CMD: sudo -u tuscan red makepkg --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
==> Making package: atool 0.39.0-4 (Wed Aug 24 12:05:12 UTC 2016)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> WARNING: Using existing $srcdir/ tree
==> Starting build()...
configure: WARNING: if you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-unknown-linux-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /usr/sbin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for perl... /usr/sbin/perl
configure: creating ./config.status
config.status: creating atool.1
config.status: creating atool.spec
config.status: creating Makefile
config.status: executing acat-link commands
config.status: executing adiff-link commands
config.status: executing als-link commands
config.status: executing apack-link commands
config.status: executing aunpack-link commands
config.status: executing arepack-link commands
==> Entering fakeroot environment...
==> Starting package()...
touch `basename "atool"`
sed "1s|[^ ]*|#!/usr/bin/perl|;/^\\$::SYSCONFDIR = /s|'.*'|'/usr/etc'|;/^\\$::PACKAGE = /s/'.*'/'atool'/;/^\\$::VERSION = /s/'.*'/'0.39.0'/;/^\\$::BUG_EMAIL = /s/'.*'/'oskar@osk.mine.nu'/" < atool > `basename atool.tmp` \
&& mv `basename "atool"` .`basename "atool-old"` \
&& mv `basename "atool.tmp"` `basename "atool"`
chmod a+x `basename "atool"`
touch .atool-stamp
make[1]: Entering directory '/tmp/atool/src/atool-0.39.0'
test -z "/tmp/atool/pkg/atool/usr/bin" || /usr/sbin/mkdir -p "/tmp/atool/pkg/atool/usr/bin"
mkdir -p /tmp/atool/pkg/atool/usr/bin
mkdir -p /tmp/atool/pkg/atool/usr/share/man/man1
for f in aunpack arepack apack acat als adiff; do \
ln -s -f atool /tmp/atool/pkg/atool/usr/bin/$f; \
ln -s -f atool.1 /tmp/atool/pkg/atool/usr/share/man/man1/$f.1; \
done
/usr/bin/install -c atool '/tmp/atool/pkg/atool/usr/bin'
test -z "/tmp/atool/pkg/atool/usr/share/man/man1" || /usr/sbin/mkdir -p "/tmp/atool/pkg/atool/usr/share/man/man1"
/usr/bin/install -c -m 644 atool.1 '/tmp/atool/pkg/atool/usr/share/man/man1'
make[1]: Leaving directory '/tmp/atool/src/atool-0.39.0'
==> Tidying install...
-> Removing doc files...
-> Purging unwanted files...
==> Checking for packaging issue...
==> Creating package "atool"...
-> Generating .PKGINFO file...
-> Generating .BUILDINFO file...
error: invalid option '--noprogressbar'
-> Adding changelog file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: atool 0.39.0-4 (Wed Aug 24 12:05:17 UTC 2016)
CMD: pacman --query --file atool-0.39.0-4-any.pkg.tar.xz
Creating hybrid package for 'atool'
Trying to find vanilla package 'atool'...
CMD: pacman --query --file /mirror/atool-0.39.0-4.pkg.tar.xz
Package file has the following structure:
/.PKGINFO
/.BUILDINFO
/.CHANGELOG
/.MTREE
/usr/share/man/man1/als.1.gz
/usr/share/man/man1/arepack.1.gz
/usr/share/man/man1/acat.1.gz
/usr/share/man/man1/atool.1.gz
/usr/share/man/man1/adiff.1.gz
/usr/share/man/man1/apack.1.gz
/usr/share/man/man1/aunpack.1.gz
/usr/bin/atool
/usr/bin/apack
/usr/bin/aunpack
/usr/bin/acat
/usr/bin/arepack
/usr/bin/als
/usr/bin/adiff
Generating .MTREE
CMD: bsdtar -czf .MTREE --format=mtree --options=!all,use-set,type,uid,mode,time,size,md5,sha256,link .PKGINFO .BUILDINFO .CHANGELOG usr
Tar-ing up files
CMD: bsdtar -cf - .PKGINFO .BUILDINFO .CHANGELOG usr .MTREE
CMD: xz -c -z
Successfully ran bsdtar -cf - .PKGINFO .BUILDINFO .CHANGELOG usr .MTREE | xz -c -z
CMD: bsdtar -tqf atool.pkg.tar.xz .PKGINFO
Created package at path /var/cache/pacman/pkg/atool.pkg.tar.xz
Attempting to access local repository, attempt 1
CMD: repo-add /var/cache/pacman/pkg/tuscan.db.tar /var/cache/pacman/pkg/atool.pkg.tar.xz
==> Extracting database to a temporary location...
==> Extracting database to a temporary location...
==> Adding package '/var/cache/pacman/pkg/atool.pkg.tar.xz'
-> Computing checksums...
-> Creating 'desc' db entry...
-> Creating 'files' db entry...
==> Creating updated database file '/var/cache/pacman/pkg/tuscan.db.tar'
Printing config logfiles
CMD: config logfiles '/tmp/atool/src/atool-0.39.0/config.log'
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by atool configure 0.39.0, which was
generated by GNU Autoconf 2.67. Invocation command line was
$ ./configure --host=x86_64-unknown-linux --prefix=/usr
## --------- ##
## Platform. ##
## --------- ##
hostname = 2ebd83699451
uname -m = x86_64
uname -r = 4.7.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Aug 17 08:13:35 CEST 2016
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1723: checking for a BSD-compatible install
configure:1791: result: /usr/bin/install -c
configure:1802: checking whether build environment is sane
configure:1852: result: yes
configure:1901: checking for x86_64-unknown-linux-strip
configure:1931: result: no
configure:1941: checking for strip
configure:1957: found /usr/sbin/strip
configure:1968: result: strip
configure:1993: checking for a thread-safe mkdir -p
configure:2032: result: /usr/sbin/mkdir -p
configure:2045: checking for gawk
configure:2061: found /usr/sbin/gawk
configure:2072: result: gawk
configure:2083: checking whether make sets $(MAKE)
configure:2105: result: yes
configure:2225: checking for perl
configure:2243: found /usr/sbin/perl
configure:2255: result: /usr/sbin/perl
configure:2427: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by atool config.status 0.39.0, which was
generated by GNU Autoconf 2.67. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on 2ebd83699451
config.status:767: creating atool.1
config.status:767: creating atool.spec
config.status:767: creating Makefile
config.status:938: executing acat-link commands
config.status:938: executing adiff-link commands
config.status:938: executing als-link commands
config.status:938: executing apack-link commands
config.status:938: executing aunpack-link commands
config.status:938: executing arepack-link commands
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-unknown-linux
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_PERL=/usr/sbin/perl
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/sbin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_make_make_set=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/missing --run aclocal-1.11'
AMTAR='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/missing --run tar'
AUTOCONF='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/missing --run autoconf'
AUTOHEADER='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/missing --run autoheader'
AUTOMAKE='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/missing --run automake-1.11'
AWK='gawk'
CYGPATH_W='echo'
DEFS='-DPACKAGE_NAME=\"atool\" -DPACKAGE_TARNAME=\"atool\" -DPACKAGE_VERSION=\"0.39.0\" -DPACKAGE_STRING=\"atool\ 0.39.0\" -DPACKAGE_BUGREPORT=\"oskar@osk.mine.nu\" -DPACKAGE_URL=\"\" -DPACKAGE=\"atool\" -DVERSION=\"0.39.0\" -DSBINDIR=\"/usr/sbin\" -DSYSCONFDIR=\"/usr/etc\" -DLOCALSTATEDIR=\"/usr/var\"'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LIBOBJS=''
LIBS=''
LOCALSTATEDIR='/usr/var'
LTLIBOBJS=''
MAKEINFO='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/missing --run makeinfo'
MKDIR_P='/usr/sbin/mkdir -p'
PACKAGE='atool'
PACKAGE_BUGREPORT='oskar@osk.mine.nu'
PACKAGE_NAME='atool'
PACKAGE_STRING='atool 0.39.0'
PACKAGE_TARNAME='atool'
PACKAGE_URL=''
PACKAGE_VERSION='0.39.0'
PATH_SEPARATOR=':'
PERL='/usr/sbin/perl'
PERL_SHEBANG='\#!/usr/bin/perl'
PERL_SITELIB='/usr/share/perl5/site_perl'
SBINDIR='/usr/sbin'
SET_MAKE=''
SHELL='/bin/sh'
STRIP='strip'
SYSCONFDIR='/usr/etc'
VERSION='0.39.0'
am__isrc=''
am__leading_dot='.'
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build_alias=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host_alias='x86_64-unknown-linux'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /tmp/atool/src/atool-0.39.0/build-aux/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/usr/sbin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "atool"
#define PACKAGE_TARNAME "atool"
#define PACKAGE_VERSION "0.39.0"
#define PACKAGE_STRING "atool 0.39.0"
#define PACKAGE_BUGREPORT "oskar@osk.mine.nu"
#define PACKAGE_URL ""
#define PACKAGE "atool"
#define VERSION "0.39.0"
#define SBINDIR "/usr/sbin"
#define SYSCONFDIR "/usr/etc"
#define LOCALSTATEDIR "/usr/var"
configure: exit 0