Build tree for "stow"
on toolchain "vanilla"
- 0
None
- 0
None
- 127
/usr/sbin/pacman -T texi2html
- 0
/usr/sbin/pacman -T perl
- ?
sudo /usr/sbin/pacman --noconfirm --color never --noprogressbar -S --asdeps texi2html
- 1
/usr/bin/tty
- 0
./configure --host=x86_64-unknown-linux --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-pmdir=/usr/lib/perl5/vendor_perl/
- ?
cat
- 0
None
- 127
/usr/convex/getsysinfo
- ?
/usr/bin/install -c conftest.one conftest.two /tmp/stow/src/stow-2.2.2/conftest.dir
- 0
/bin/sh /tmp/stow/src/stow-2.2.2/automake/missing --is-lightweight
- 0
make -f conftest.make
- 0
make -f -
- 0
/usr/bin/perl -MTest::More -e 1
- 2
/usr/bin/perl -MTest::Output -e 1
- 0
/usr/bin/perl -MConfig -wle ($_ = $Config{installsitelib})
=~ s!^\Q$Config{siteprefix}/!!; print
- 0
/bin/sh ./config.status
- 0
make
- 0
/bin/sh -c [ -d bin ] || mkdir bin # required in vpath mode
- 0
/bin/sh -c [ -d bin ] || mkdir bin # required in vpath mode
- 0
/bin/sh -c sed -e 's|[@]PERL[@]|/usr/bin/perl|g' -e 's|[@]VERSION[@]|2.2.2|g' -e "s|[@]USE_LIB_PMDIR[@]|$use_lib_pmdir|g" < bin/chkstow.in > bin/chkstow
- 0
/bin/sh -c echo; echo "# Perl modules will be installed to /usr/lib/perl5/vendor_perl/"; echo "# "; if PERL5LIB= /usr/bin/perl -V | awk '/@INC/ {p=1; next} p==1 {print $1}' | grep -q "/usr/lib/perl5/vendor_perl/"; then echo "# This is in /usr/bin/perl's built-in @INC, so everything"; echo "# should work fine with no extra effort."; else echo "# This is not in /usr/bin/perl's built-in @INC, so the"; echo "# front-end scripts will have an appropriate \"use lib\""; echo "# line inserted to compensate."; fi; echo
- 0
/bin/sh -c echo "Generated bin/chkstow from bin/chkstow.in"
- 0
/bin/sh -c [ -d lib ] || mkdir lib # required in vpath mode
- 0
/bin/sh -c ( sed -e 's|[@]PERL[@]|/usr/bin/perl|g' -e 's|[@]VERSION[@]|2.2.2|g' -e "s|[@]USE_LIB_PMDIR[@]|$use_lib_pmdir|g" < lib/Stow.pm.in; cat ./default-ignore-list ) > lib/Stow.pm
- 0
/bin/sh -c echo "Generated lib/Stow.pm from lib/Stow.pm.in and ./default-ignore-list"
- 0
/bin/sh -c if PERL5LIB= /usr/bin/perl -V | awk '/@INC/ {p=1; next} p==1 {print $1}' | grep -q "/usr/lib/perl5/vendor_perl/"; then use_lib_pmdir=""; else use_lib_pmdir="use lib \"/usr/lib/perl5/vendor_perl/\";"; fi; \
sed -e 's|[@]PERL[@]|/usr/bin/perl|g' -e 's|[@]VERSION[@]|2.2.2|g' -e "s|[@]USE_LIB_PMDIR[@]|$use_lib_pmdir|g" < bin/stow.in > bin/stow
- 0
/bin/sh -c echo "Generated bin/stow from bin/stow.in"
- 0
fakeroot -- /usr/sbin/makepkg -F --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
- 0
/usr/bin/faked
- 0
/usr/sbin/makepkg -F --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
- 0
None
- 1
/usr/bin/pacman --noconfirm --color never --noprogressbar -Q
- 0
make DESTDIR=/tmp/stow/pkg/stow install
- 0
make install-exec-am install-data-am
- 0
/bin/sh -c list='bin/stow bin/chkstow'; test -n "/usr/bin" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/stow/pkg/stow/usr/bin'"; \
/usr/bin/mkdir -p "/tmp/stow/pkg/stow/usr/bin" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
if test -f "$d$p"; then echo "$d$p"; echo "$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;s,x,x,' | sed 'N;N;N;s,\n, ,g' | \
gawk 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($2 == $4) { files[d] = files[d] " " $1; \
if (++n[d] == 40) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $4, $1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$dir" = .; then dir=; else dir=/$dir; fi; \
test -z "$files" || { \
echo " /usr/bin/install -c $files '/tmp/stow/pkg/stow/usr/bin$dir'"; \
/usr/bin/install -c $files "/tmp/stow/pkg/stow/usr/bin$dir" || exit $?; \
} \
; done
- 0
/usr/bin/install -c bin/stow bin/chkstow /tmp/stow/pkg/stow/usr/bin
- 0
/bin/sh -c list='README doc/manual.pdf doc/manual-single.html doc/version.texi ChangeLog doc/ChangeLog.OLD'; test -n "/usr/share/doc/stow" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/stow/pkg/stow/usr/share/doc/stow'"; \
/usr/bin/mkdir -p "/tmp/stow/pkg/stow/usr/share/doc/stow" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
echo "$d$p"; \
done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
echo " /usr/bin/install -c -m 644 $files '/tmp/stow/pkg/stow/usr/share/doc/stow'"; \
/usr/bin/install -c -m 644 $files "/tmp/stow/pkg/stow/usr/share/doc/stow" || exit $?; \
done
- 0
/usr/bin/install -c -m 644 README doc/manual.pdf doc/manual-single.html doc/version.texi ChangeLog doc/ChangeLog.OLD /tmp/stow/pkg/stow/usr/share/doc/stow
- 0
/bin/sh -c list='lib/Stow/Util.pm'; test -n "/usr/lib/perl5/vendor_perl//Stow" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl//Stow'"; \
/usr/bin/mkdir -p "/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl//Stow" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
echo "$d$p"; \
done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
echo " /usr/bin/install -c -m 644 $files '/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl//Stow'"; \
/usr/bin/install -c -m 644 $files "/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl//Stow" || exit $?; \
done
- 0
/usr/bin/install -c -m 644 lib/Stow/Util.pm /tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl//Stow
- 0
/bin/sh -c srcdirstrip=`echo "." | sed 's|.|.|g'`; \
list='./doc/stow.info'; test -n "/usr/share/info" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/stow/pkg/stow/usr/share/info'"; \
/usr/bin/mkdir -p "/tmp/stow/pkg/stow/usr/share/info" || exit 1; \
fi; \
for file in $list; do \
case $file in \
./*) file=`echo "$file" | sed "s|^$srcdirstrip/||"`;; \
esac; \
if test -f $file; then d=.; else d=.; fi; \
file_i=`echo "$file" | sed 's|\.info$||;s|$|.i|'`; \
for ifile in $d/$file $d/$file-[0-9] $d/$file-[0-9][0-9] \
$d/$file_i[0-9] $d/$file_i[0-9][0-9] ; do \
if test -f $ifile; then \
echo "$ifile"; \
else : ; fi; \
done; \
done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
echo " /usr/bin/install -c -m 644 $files '/tmp/stow/pkg/stow/usr/share/info'"; \
/usr/bin/install -c -m 644 $files "/tmp/stow/pkg/stow/usr/share/info" || exit $?; done
- 0
/usr/bin/install -c -m 644 ./doc/stow.info /tmp/stow/pkg/stow/usr/share/info
- 0
/bin/sh -c list1=''; \
list2='doc/stow.8'; \
test -n "/usr/share/man/man8" \
&& test -n "`echo $list1$list2`" \
|| exit 0; \
echo " /usr/bin/mkdir -p '/tmp/stow/pkg/stow/usr/share/man/man8'"; \
/usr/bin/mkdir -p "/tmp/stow/pkg/stow/usr/share/man/man8" || exit 1; \
{ for i in $list1; do echo "$i"; done; \
if test -n "$list2"; then \
for i in $list2; do echo "$i"; done \
| sed -n '/\.8[a-z]*$/p'; \
fi; \
} | while read p; do \
if test -f $p; then d=; else d="./"; fi; \
echo "$d$p"; echo "$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$,8,;x' \
-e 's,\.[0-9a-z]*$,,;s,x,x,;G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$base" = "$inst"; then list="$list $file"; else \
echo " /usr/bin/install -c -m 644 '$file' '/tmp/stow/pkg/stow/usr/share/man/man8/$inst'"; \
/usr/bin/install -c -m 644 "$file" "/tmp/stow/pkg/stow/usr/share/man/man8/$inst" || exit $?; \
fi; \
done; \
for i in $list; do echo "$i"; done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
test -z "$files" || { \
echo " /usr/bin/install -c -m 644 $files '/tmp/stow/pkg/stow/usr/share/man/man8'"; \
/usr/bin/install -c -m 644 $files "/tmp/stow/pkg/stow/usr/share/man/man8" || exit $?; }; \
done; }
- 0
/bin/sh -c if case $AM_UPDATE_INFO_DIR in n|no|NO) false;; *) (install-info --version) >/dev/null 2>&1;; esac; then \
list='./doc/stow.info'; test -n "/usr/share/info" || list=; \
for file in $list; do \
relfile=`echo "$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='/tmp/stow/pkg/stow/usr/share/info' '/tmp/stow/pkg/stow/usr/share/info/$relfile'";\
install-info --info-dir="/tmp/stow/pkg/stow/usr/share/info" "/tmp/stow/pkg/stow/usr/share/info/$relfile" || :;\
done; \
else : ; fi
- 0
install-info --version
- 0
install-info --info-dir=/tmp/stow/pkg/stow/usr/share/info /tmp/stow/pkg/stow/usr/share/info/stow.info
- 0
/bin/sh -c list='lib/Stow.pm'; test -n "/usr/lib/perl5/vendor_perl/" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl/'"; \
/usr/bin/mkdir -p "/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl/" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
echo "$d$p"; \
done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
echo " /usr/bin/install -c -m 644 $files '/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl/'"; \
/usr/bin/install -c -m 644 $files "/tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl/" || exit $?; \
done
- 0
/usr/bin/install -c -m 644 lib/Stow.pm /tmp/stow/pkg/stow/usr/lib/perl5/vendor_perl/
- 0
make install-data-hook
- 123
xargs -0 grep -q -I /tmp/stow/src
- 123
xargs -0 grep -q -I /tmp/stow/pkg
- 0
fakeroot -v
- 0
openssl dgst -sha256 /tmp/stow/PKGBUILD
- ?
bsdtar -czf .MTREE --format=mtree --options=!all,use-set,type,uid,gid,mode,time,size,md5,sha256,link .PKGINFO .BUILDINFO usr
- ?
bsdtar -cf - .PKGINFO .BUILDINFO .MTREE usr
- 0
xz -c -z -
- 0
/usr/sbin/pacman -T texi2html
- 0
/usr/bin/install -c -m 644 doc/stow.8 /tmp/stow/pkg/stow/usr/share/man/man8