Build tree for "mate-common"
on toolchain "vanilla"
- 0
None
- 0
None
- 127
/usr/sbin/pacman -T autoconf automake gettext gtk-doc intltool libtool pkg-config
- ?
sudo /usr/sbin/pacman --noconfirm --color never --noprogressbar -S --asdeps intltool
- 1
/usr/bin/tty
- 0
/usr/sbin/pacman -T autoconf automake gettext gtk-doc intltool libtool pkg-config
- 0
./configure --host=x86_64-unknown-linux --prefix=/usr
- ?
cat
- 0
None
- 127
/usr/convex/getsysinfo
- ?
/usr/bin/install -c conftest.one conftest.two /tmp/mate-common/src/mate-common-1.12.0/conftest.dir
- 0
/bin/sh /tmp/mate-common/src/mate-common-1.12.0/missing --is-lightweight
- 0
make -f conftest.make
- 0
make -f -
- 0
/bin/sh ./config.status
- 0
make
- 0
/bin/sh -c fail=; \
if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if test -n ' Makefile' && test -n '0'; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
case "all-recursive" in \
distclean-* | maintainer-clean-*) list='macros doc-build doc' ;; \
*) list='macros doc-build doc' ;; \
esac; \
for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
- 0
make all
- 0
make all
- 0
make all
- 0
make all-am
- 0
fakeroot -- /usr/sbin/makepkg -F --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
- 0
/usr/bin/faked
- 0
/usr/sbin/makepkg -F --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
- 0
None
- 1
/usr/bin/pacman --noconfirm --color never --noprogressbar -Q
- 0
make DESTDIR=/tmp/mate-common/pkg/mate-common install
- 0
/bin/sh -c fail=; \
if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if test -n ' Makefile' && test -n '0'; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo install-recursive | sed s/-recursive//`; \
case "install-recursive" in \
distclean-* | maintainer-clean-*) list='macros doc-build doc' ;; \
*) list='macros doc-build doc' ;; \
esac; \
for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
- 0
make install
- 0
make install-exec-am install-data-am
- 0
/bin/sh -c list='mate-autogen'; test -n "/usr/bin" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/mate-common/pkg/mate-common/usr/bin'"; \
/usr/bin/mkdir -p "/tmp/mate-common/pkg/mate-common/usr/bin" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
if test -f "$d$p"; then echo "$d$p"; echo "$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;s,x,x,' | sed 'N;N;N;s,\n, ,g' | \
gawk 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($2 == $4) { files[d] = files[d] " " $1; \
if (++n[d] == 40) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $4, $1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$dir" = .; then dir=; else dir=/$dir; fi; \
test -z "$files" || { \
echo " /usr/bin/install -c $files '/tmp/mate-common/pkg/mate-common/usr/bin$dir'"; \
/usr/bin/install -c $files "/tmp/mate-common/pkg/mate-common/usr/bin$dir" || exit $?; \
} \
; done
- 0
/usr/bin/install -c mate-autogen /tmp/mate-common/pkg/mate-common/usr/bin
- 0
/bin/sh -c list='mate-common.m4 mate-compiler-flags.m4 mate-code-coverage.m4'; test -n "/usr/share/aclocal" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/mate-common/pkg/mate-common/usr/share/aclocal'"; \
/usr/bin/mkdir -p "/tmp/mate-common/pkg/mate-common/usr/share/aclocal" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
echo "$d$p"; \
done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
echo " /usr/bin/install -c -m 644 $files '/tmp/mate-common/pkg/mate-common/usr/share/aclocal'"; \
/usr/bin/install -c -m 644 $files "/tmp/mate-common/pkg/mate-common/usr/share/aclocal" || exit $?; \
done
- 0
/usr/bin/install -c -m 644 mate-common.m4 mate-compiler-flags.m4 mate-code-coverage.m4 /tmp/mate-common/pkg/mate-common/usr/share/aclocal
- 0
make install
- 0
make install-exec-am install-data-am
- 0
/bin/sh -c list='mate-doc-common'; test -n "/usr/bin" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/mate-common/pkg/mate-common/usr/bin'"; \
/usr/bin/mkdir -p "/tmp/mate-common/pkg/mate-common/usr/bin" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
if test -f "$d$p"; then echo "$d$p"; echo "$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;s,x,x,' | sed 'N;N;N;s,\n, ,g' | \
gawk 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($2 == $4) { files[d] = files[d] " " $1; \
if (++n[d] == 40) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $4, $1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$dir" = .; then dir=; else dir=/$dir; fi; \
test -z "$files" || { \
echo " /usr/bin/install -c $files '/tmp/mate-common/pkg/mate-common/usr/bin$dir'"; \
/usr/bin/install -c $files "/tmp/mate-common/pkg/mate-common/usr/bin$dir" || exit $?; \
} \
; done
- 0
/usr/bin/install -c mate-doc-common /tmp/mate-common/pkg/mate-common/usr/bin
- 0
/bin/sh -c list='omf.make xmldocs.make '; test -n "/usr/share/mate-common/data" || list=; \
if test -n "$list"; then \
echo " /usr/bin/mkdir -p '/tmp/mate-common/pkg/mate-common/usr/share/mate-common/data'"; \
/usr/bin/mkdir -p "/tmp/mate-common/pkg/mate-common/usr/share/mate-common/data" || exit 1; \
fi; \
for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
echo "$d$p"; \
done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
echo " /usr/bin/install -c -m 644 $files '/tmp/mate-common/pkg/mate-common/usr/share/mate-common/data'"; \
/usr/bin/install -c -m 644 $files "/tmp/mate-common/pkg/mate-common/usr/share/mate-common/data" || exit $?; \
done
- 0
/usr/bin/install -c -m 644 omf.make xmldocs.make /tmp/mate-common/pkg/mate-common/usr/share/mate-common/data
- 0
make install
- 0
make install-exec-am install-data-am
- 0
/bin/sh -c list1=''; \
list2='mate-autogen.1 mate-doc-common.1'; \
test -n "/usr/share/man/man1" \
&& test -n "`echo $list1$list2`" \
|| exit 0; \
echo " /usr/bin/mkdir -p '/tmp/mate-common/pkg/mate-common/usr/share/man/man1'"; \
/usr/bin/mkdir -p "/tmp/mate-common/pkg/mate-common/usr/share/man/man1" || exit 1; \
{ for i in $list1; do echo "$i"; done; \
if test -n "$list2"; then \
for i in $list2; do echo "$i"; done \
| sed -n '/\.1[a-z]*$/p'; \
fi; \
} | while read p; do \
if test -f $p; then d=; else d="./"; fi; \
echo "$d$p"; echo "$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$,1,;x' \
-e 's,\.[0-9a-z]*$,,;s,x,x,;G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$base" = "$inst"; then list="$list $file"; else \
echo " /usr/bin/install -c -m 644 '$file' '/tmp/mate-common/pkg/mate-common/usr/share/man/man1/$inst'"; \
/usr/bin/install -c -m 644 "$file" "/tmp/mate-common/pkg/mate-common/usr/share/man/man1/$inst" || exit $?; \
fi; \
done; \
for i in $list; do echo "$i"; done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \
while read files; do \
test -z "$files" || { \
echo " /usr/bin/install -c -m 644 $files '/tmp/mate-common/pkg/mate-common/usr/share/man/man1'"; \
/usr/bin/install -c -m 644 $files "/tmp/mate-common/pkg/mate-common/usr/share/man/man1" || exit $?; }; \
done; }
- 0
/usr/bin/install -c -m 644 mate-autogen.1 mate-doc-common.1 /tmp/mate-common/pkg/mate-common/usr/share/man/man1
- 0
make install-am
- 0
make install-exec-am install-data-am
- 123
xargs -0 grep -q -I /tmp/mate-common/src
- 123
xargs -0 grep -q -I /tmp/mate-common/pkg
- 0
fakeroot -v
- 0
openssl dgst -sha256 /tmp/mate-common/PKGBUILD
- ?
bsdtar -czf .MTREE --format=mtree --options=!all,use-set,type,uid,gid,mode,time,size,md5,sha256,link .PKGINFO .BUILDINFO usr
- ?
bsdtar -cf - .PKGINFO .BUILDINFO .MTREE usr
- 0
xz -c -z -