Build tree for "intltool" on toolchain "vanilla"

• 0 None
  • 0 None
    • 127 /usr/sbin/pacman -T perl-xml-parser
  • ? sudo /usr/sbin/pacman --noconfirm --color never --noprogressbar -S --asdeps perl-xml-parser
  • 1 /usr/bin/tty
  • 0 ./configure --host=x86_64-unknown-linux --prefix=/usr
    • ? cat
      • 0 None
        • 127 /usr/convex/getsysinfo
    • ? /usr/bin/install -c conftest.one conftest.two /tmp/intltool/src/intltool-0.51.0/conftest.dir
    • 0 /bin/sh /tmp/intltool/src/intltool-0.51.0/missing --is-lightweight
    • 0 make -f conftest.make
    • 0 make -f -
    • 0 /usr/bin/perl -e use 5.8.1;
    • 0 /usr/bin/perl -e printf '%vd', $^V
    • 0 /usr/bin/perl -e require XML::Parser
    • 0 /bin/sh ./config.status
  • 0 make
    • 0 /bin/sh -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if test -n ' Makefile' && test -n '0'; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ case "all-recursive" in \ distclean-* | maintainer-clean-*) list='tests doc' ;; \ *) list='tests doc' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
      • 0 make all
        • 0 /bin/sh -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if test -n ' Makefile' && test -n '1'; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ case "all-recursive" in \ distclean-* | maintainer-clean-*) list='cases results' ;; \ *) list='cases results' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
          • 0 make all
          • 0 make all
          • 0 make all-am
      • 0 make all
      • 0 make all-am
        • 0 /bin/sh -c sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.51.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-extract.in > intltool-extract
        • 0 /bin/sh -c sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.51.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-merge.in > intltool-merge
        • 0 /bin/sh -c sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.51.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-update.in > intltool-update
        • 0 /bin/sh -c sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.51.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-prepare.in > intltool-prepare
  • 0 fakeroot -- /usr/sbin/makepkg -F --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
    • 0 /usr/bin/faked
    • 0 /usr/sbin/makepkg -F --noextract --syncdeps --skipinteg --skippgpcheck --skipchecksums --noconfirm --nocolor --log --noprogressbar --nocheck
      • 0 None
        • 1 /usr/bin/pacman --noconfirm --color never --noprogressbar -Q
      • 0 make DESTDIR=/tmp/intltool/pkg/intltool install
        • 0 /bin/sh -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if test -n ' Makefile' && test -n '0'; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo install-recursive | sed s/-recursive//`; \ case "install-recursive" in \ distclean-* | maintainer-clean-*) list='tests doc' ;; \ *) list='tests doc' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
          • 0 make install
            • 0 /bin/sh -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if test -n ' Makefile' && test -n '1'; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \ ]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs ]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo install-recursive | sed s/-recursive//`; \ case "install-recursive" in \ distclean-* | maintainer-clean-*) list='cases results' ;; \ *) list='cases results' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
              • 0 make install
                • 0 make install-exec-am install-data-am
              • 0 make install
                • 0 make install-exec-am install-data-am
              • 0 make install-am
                • 0 make install-exec-am install-data-am
          • 0 make install
            • 0 make install-exec-am install-data-am
              • 0 /bin/sh -c list1=''; \ list2='intltoolize.8 intltool-extract.8 intltool-merge.8 intltool-prepare.8 intltool-update.8'; \ test -n "/usr/share/man/man8" \ && test -n "`echo $list1$list2`" \ || exit 0; \ echo " /usr/bin/mkdir -p '/tmp/intltool/pkg/intltool/usr/share/man/man8'"; \ /usr/bin/mkdir -p "/tmp/intltool/pkg/intltool/usr/share/man/man8" || exit 1; \ { for i in $list1; do echo "$i"; done; \ if test -n "$list2"; then \ for i in $list2; do echo "$i"; done \ | sed -n '/\.8[a-z]*$/p'; \ fi; \ } | while read p; do \ if test -f $p; then d=; else d="./"; fi; \ echo "$d$p"; echo "$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$,8,;x' \ -e 's,\.[0-9a-z]*$,,;s,x,x,;G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$base" = "$inst"; then list="$list $file"; else \ echo " /usr/bin/install -c -m 644 '$file' '/tmp/intltool/pkg/intltool/usr/share/man/man8/$inst'"; \ /usr/bin/install -c -m 644 "$file" "/tmp/intltool/pkg/intltool/usr/share/man/man8/$inst" || exit $?; \ fi; \ done; \ for i in $list; do echo "$i"; done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \ while read files; do \ test -z "$files" || { \ echo " /usr/bin/install -c -m 644 $files '/tmp/intltool/pkg/intltool/usr/share/man/man8'"; \ /usr/bin/install -c -m 644 $files "/tmp/intltool/pkg/intltool/usr/share/man/man8" || exit $?; }; \ done; }
                • 0 /usr/bin/install -c -m 644 intltoolize.8 intltool-extract.8 intltool-merge.8 intltool-prepare.8 intltool-update.8 /tmp/intltool/pkg/intltool/usr/share/man/man8
          • 0 make install-am
            • 0 make install-exec-am install-data-am
              • 0 /bin/sh -c list='intltool-extract intltool-merge intltool-update intltoolize intltool-prepare'; test -n "/usr/bin" || list=; \ if test -n "$list"; then \ echo " /usr/bin/mkdir -p '/tmp/intltool/pkg/intltool/usr/bin'"; \ /usr/bin/mkdir -p "/tmp/intltool/pkg/intltool/usr/bin" || exit 1; \ fi; \ for p in $list; do \ if test -f "$p"; then d=; else d="./"; fi; \ if test -f "$d$p"; then echo "$d$p"; echo "$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;s,x,x,' | sed 'N;N;N;s,\n, ,g' | \ gawk 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($2 == $4) { files[d] = files[d] " " $1; \ if (++n[d] == 40) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $4, $1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$dir" = .; then dir=; else dir=/$dir; fi; \ test -z "$files" || { \ echo " /usr/bin/install -c $files '/tmp/intltool/pkg/intltool/usr/bin$dir'"; \ /usr/bin/install -c $files "/tmp/intltool/pkg/intltool/usr/bin$dir" || exit $?; \ } \ ; done
                • 0 /usr/bin/install -c intltool-extract intltool-merge intltool-update intltoolize intltool-prepare /tmp/intltool/pkg/intltool/usr/bin
              • 0 /bin/sh -c list='intltool.m4'; test -n "/usr/share/aclocal" || list=; \ if test -n "$list"; then \ echo " /usr/bin/mkdir -p '/tmp/intltool/pkg/intltool/usr/share/aclocal'"; \ /usr/bin/mkdir -p "/tmp/intltool/pkg/intltool/usr/share/aclocal" || exit 1; \ fi; \ for p in $list; do \ if test -f "$p"; then d=; else d="./"; fi; \ echo "$d$p"; \ done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \ while read files; do \ echo " /usr/bin/install -c -m 644 $files '/tmp/intltool/pkg/intltool/usr/share/aclocal'"; \ /usr/bin/install -c -m 644 $files "/tmp/intltool/pkg/intltool/usr/share/aclocal" || exit $?; \ done
                • 0 /usr/bin/install -c -m 644 intltool.m4 /tmp/intltool/pkg/intltool/usr/share/aclocal
              • 0 /bin/sh -c list='Makefile.in.in'; test -n "/usr/share/intltool" || list=; \ if test -n "$list"; then \ echo " /usr/bin/mkdir -p '/tmp/intltool/pkg/intltool/usr/share/intltool'"; \ /usr/bin/mkdir -p "/tmp/intltool/pkg/intltool/usr/share/intltool" || exit 1; \ fi; \ for p in $list; do \ if test -f "$p"; then d=; else d="./"; fi; \ echo "$d$p"; \ done | sed '$!N;$!N;$!N;$!N;$!N;$!N;$!N;s/\n/ /g' | sed '$!N;$!N;$!N;$!N;s/\n/ /g' | \ while read files; do \ echo " /usr/bin/install -c -m 644 $files '/tmp/intltool/pkg/intltool/usr/share/intltool'"; \ /usr/bin/install -c -m 644 $files "/tmp/intltool/pkg/intltool/usr/share/intltool" || exit $?; \ done
                • 0 /usr/bin/install -c -m 644 Makefile.in.in /tmp/intltool/pkg/intltool/usr/share/intltool
      • ? install -D -m644 doc/I18N-HOWTO /tmp/intltool/pkg/intltool/usr/share/doc/intltool/I18N-HOWTO
      • 123 xargs -0 grep -q -I /tmp/intltool/src
      • 123 xargs -0 grep -q -I /tmp/intltool/pkg
      • 0 fakeroot -v
      • 0 openssl dgst -sha256 /tmp/intltool/PKGBUILD
      • ? bsdtar -czf .MTREE --format=mtree --options=!all,use-set,type,uid,gid,mode,time,size,md5,sha256,link .PKGINFO .BUILDINFO usr
      • ? bsdtar -cf - .PKGINFO .BUILDINFO .MTREE usr
      • 0 xz -c -z -
• 0 /usr/sbin/pacman -T perl-xml-parser